Items where Division is "Faculty of Bioengineering and Technology" and Year is 2018

Indexed Article

Ab Rahman, M.F and Rejab, N.A and Ahmad, Z.A and Mohamed, J.J and Ain, M.F and Abdullah, S. (2018) Influence of soda lime glass addition on the dielectric properties of CCTO ceramics. Journal of Physics: Conference Series, 1082. pp. 1-5. ISSN 17426588

Ab Rahman, Mohd Fariz and Ain, Mohd Fadzil and Mohamed, Julie Juliewatty and Ahmad, Zainal Arifin (2018) Effective dielectric loss (tan δ) reduction of CaCu3Ti4O12 (CCTO) via various addition of glasses. International Journal of Applied Ceramic Technology, 16 (2). ISSN 1546542X

Abd Aziz, Nor Azlina and Ibrahim, Zuwairie and Mubin, Marizan and Nawawi, Sophan Wahyudi and Mohamad, Mohd Saberi (2018) Improving particle swarm optimization via adaptive switching asynchronous – synchronous update. Applied Soft Computing, 72. pp. 298-311. ISSN 1568-4946

Abdul Hamid, K. and Azmi, W.H. and Nabil, M.F. and Mamat, Rizalman (2018) Experimental investigation of nanoparticle mixture ratios on TiO2–SiO2 nanofluids heat transfer performance under turbulent flow. International Journal of Heat and Mass Transfer, 118. pp. 617-627. ISSN 0017-9310

Abu Bakar, M.B and Masri, M.N and Mohamad Amini, M.H and Mohd Thirmizir, M.Z and Salim, M.S (2018) Mechanical, thermal and morphological properties of epoxy resin toughened with epoxidized soybean oil. AIP Conference Proceedings, 2030 (1). ISSN 0094243X

Ahmad Sobri, Sharizal and Robert, Heinemann and David, Whitehead and Shuaib, Norshah Afizi (2018) Drilling strategy for thick carbon fiber reinforced polymer composites (CFRP): a preliminary assessment. Journal of Engineering and Technological Sciences, 50 (1). pp. 21-39. ISSN 2337-5779

Ahmed Janvekar, Ayub and Abdullah, Mohd Zulkifly and Ahmad, Zainal Arifin and Abas, Aizat and Zuber, Mohammad and Ismail, Ahmad Kamal and Hussien, Ahmed and Kataraki, Pramod and Mohamed, Mazlan and Bashir, Musavir and Husin, Azmi and Fadzli, Khairil (2018) Experimental and numerical studies of porous media combustion in micro burner. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1). pp. 112-120. ISSN 2289-7879

Aishath Nailaa and Steve H.Flint and Ahmad Ziad Sulaiman and Azilah Ajit and Zuben Weeds (2018) Classical and novel approaches to the analysis of honey and detection of adulterants. Food Control, 90. pp. 152-165. ISSN 9567135

Bahanurddin, Nor Fatin Khairah and Mohamed, Julie Juliewatty and Ahmad, Zainal Arifin (2018) Effects of CIP compaction pressure on piezoelectric properties of K0.5Na0.5NbO3. Journal of Materials Science: Materials in Electronics, 29 (7). pp. 5439-5445. ISSN 0957-4522

Bakar, W.Z.W. and Basri, Shah Nor and Jamaludin, S.N.S and Sajjad, A. (2018) Functionally graded materials: An overview of dental applications. World Journal of Dentistry, 9 (2). pp. 137-144. ISSN 9766006

Che Osmi, Siti Aishah and Wan Ishak, Wan Faizal and Azman, Mohammad Adam and Ismail, Abdullah Siddiqi and Abu Samah, Nurlin (2018) Recent assessment of physico-chemical water quality in Malacca River using water quality index and statistical analysis. IOP Conference Series: Earth and Environmental Science, 169. pp. 1-10. ISSN 1755-1307

Daud K.M. and Zalmiyah Zakaria and Zuraini Ali Shah and Mohd Saberi Mohamad and Safaai Deris and Omatu S. and Juan Manuel Corchado Rodríguez (2018) A hybrid of differential search algorithm and flux balance analysis to: Identify knockout strategies for in silico optimization of metabolites production. International Journal of Advances in Soft Computing and its Applications, 10 (2).

González-Briones, Alfonso and De La Prieta, Fernando and Mohamad, Mohd Saberi and Omatu, Sigeru and M. Corchado, Juan (2018) Multi-agent systems applications in energy optimization problems: a state-of-the-art review. Energies, 11 (8). pp. 1-28. ISSN 1996-1073

Jaafar, Hidayani and Ahmad, Zainal Arifin and Ain, Mohd Fadzil (2018) The use of carbon black-TiO2 composite prepared using solid state method as counter electrode and E. conferta as sensitizer for dye-sensitized solar cell (DSSC) applications. Optical Materials, 79. pp. 366-371. ISSN 0925-3467

K.Sudhakar and R.Mamat and M.Samykano and W.H.Azmi and Wan Mohd Faizal Wan Ishak and Talal Yusaf (2018) An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91. pp. 165-179. ISSN 1364-0321

Maleeva E. A and Kritski O. L and Mohd Hazim Mohamad Amini (2018) Constructing an information matrix for multivariate DCC-MGARCH (1, 1) method. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2838-2845. ISSN 1819-6608

Mamat, Sarizam and Tashiro, Shinichi and Tanaka, Manabu and Yusoff, Mahani (2018) Study on factors affecting the droplet temperature in plasma MIG welding process. Journal of Physics D: Applied Physics, 51 (13). pp. 1-56. ISSN 0022-3727

Mohamad Amini, Mohd Hazim and Hashim, Rokiah and Sulaiman, Nurul Syuhada and Mohamed, Mazlan and Masri, Mohamad Najmi and Ahmad Sobri, Sharizal and Ibrahim, Nor Izaida (2018) Study on dimensional stability of particleboard made using glutardialdehyde modified corn starch as the binder at various relative humidity. International Journal of Engineering & Technology, 7 (2.15). pp. 19-22. ISSN 2227524X

Mohamad Amini, Mohd Hazim and Hashim, Rokiah and Sulaiman, Nurul Syuhada and Sulaiman, Othman and Abu Bakar, Mohamad Bashree and Mohamed, Mazlan and Rahman, Rozyanty (2018) Fungal resistance of particleboard made using glutardialdehyde modified corn starch as the binder with the aid of urea formaldehyde resin. International Journal of Engineering and Technology (UAE), 7 (2.15). pp. 23-26. ISSN 2227524X

Mohamed, Mazlan and Nazri Omar, Mohd and Shaiful Ashrul Ishak, Mohamad and Rahman, Rozyanty and Fahmi Mohd Roslan, Muhamad and Nur Hafiz Shaidan, Muhammad and Ismael Rizman, Zairi (2018) Finite element analysis of heat sink in term of thermal and temperature distribution with different chip power input. International Journal of Engineering & Technology, 7 (2). pp. 90-93. ISSN 2227524X

Mohd Noor, Siti Nuraini and Jun, Wei Lim and Man, Kee Lam and Yoshimitsu, Uemura and Thiam, Leng Chew and Yeek, Chia Ho and Mohamad, Mardawani (2018) Lipid and protein from black soldier fly larvae fed with self- fermented coconut waste medium. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 88-95. ISSN 2289-7879

Muhammad Azharuddin Arif and Mohd Saberi Mohamad and Muhammad Shafie Abd Latif and Safaai Deris and Muhammad Akmal Remli and Kauthar Mohd Daud and Zuwairie Ibrahim and Sigeru, Omatu and Juan, Manuel Corchado (2018) A hybrid of Cuckoo Search and minimization of metabolic adjustment to optimize metabolites production in genome-scale models. Computers in Biology and Medicine, 102. pp. 112-119. ISSN 1879-0534

Norazriena Yusoff and Perumal Rameshkumar and An’amt Mohamed Noor and Nay Ming Huang (2018) Amperometric determination of L-cysteine using a glassy carbon electrode modified with palladium nanoparticles grown on reduced graphene oxide in a Nafion matrix. Microchimica Acta. pp. 185-246. ISSN 0026-3672 (Print) 1436-5073 (Online)

Sajab, Mohd Shaiful and Wan Abdul Rahman Jauhari, Wan Nurmawaddah and Chin, Hua Chia and Zakaria, Sarani and Kaco, Hatika and Mohamed Noor, An’amt (2018) Oleophilicity And Oil-Water Separation By Reduced Graphene Oxide Grafted Oil Palm Empty Fruit Bunch Fibres. Sains Malaysiana, 47 (8). pp. 1892-1896. ISSN 0126-6039

Swee Kuan Loh and Swee Thing Low and Lian En Chai and Weng Howe Chan and Mohd Saberi Mohamad and Safaai Deris and Zuwairie Ibrahim and Shahreen Kasim and Zuraini Ali Shah and Hamimah Mohd Jamil and Zalmiyah Zakaria and Suhaimi Napis (2018) A review of computational approaches to predict gene functions. Current Bioinformatics, 13 (4). 373 -386. ISSN 1574-8936

Tuan Ab Rashid, T.N.I. and Mohamad, H. and Ahmad, Z.A and Mohamed, J.J (2018) Fabrication of calcium doped PlSZT ceramics using high planetary mill method. Journal of Physics: Conference Series. pp. 1-6. ISSN 17426588

Wong, C. Y. and Rao, P. V. and Soon, J. M. (2018) Identification of Klebsiella pneumoniae in microwavable chicken curries using 16s rRNA analysis. International Food Research Journal, 25 (2). pp. 620-625. ISSN 2231-7546

Wong C.Y, . and Rao, P.V., . and Soon, J.M., . (2018) Identification of Klebsiella pneumoniae in microwavable chicken curries using 16s rRNA analysis. International Food Research Journal, 25. pp. 620-625.

Yee Ching, Wong and Wan Amarina, Wan Nurdiyana and Yun Hin, Taufiq Yap (2018) The effects of different sonication times of nickel oxide and zirconium oxide catalysts in syngas production. Jurnal Teknologi, 80 (6). pp. 133-140. ISSN 0127-9696

Yen Chen Lee and Mohd Hazim Mohamad Amini and Nurul Syuhada Sulaiman and Mohamed Mazlan and Jia Geng Boon (2018) Batch adsorption and isothermic studies of malachite green dye adsorption using Leucaena leucocephala biomass as potential adsorbent in water treatment. Songklanakarin Journal of Science and Technology, 40 (3). pp. 563-569. ISSN 1253395

Zakaria, Irnie and Mohamed, W.A.N.W. and Azm, W.H. and Mamat, A.M.I. and Mamat, Rizalman and Daud, W.R.W. (2018) Thermo-electrical performance of PEM fuel cell using Al2O3 nanofluids. International Journal of Heat and Mass Transfer, 119. pp. 460-471. ISSN 0017-9310

Non-Indexed Article

Tan, Shioa Wei and Boon, Jia Geng and Low, Hui Qi and Goh, Kent Tiong and Kuek, Sook Chi and Wong, We Hoong (2018) Effect of bleaching using sodium hydroxide on pulp derived from Sesbania grandiflora. Journal of Tropical Resources and Sustainable Sciences, 6. pp. 1-3. ISSN eISSN 2462-2389

Conference or Workshop Item

Abdul Latiff, Muhammad Ihsan and Muhammad Nuruzzaman, Dewan and Basri, Shahnor and Ismail, Noor Mazni and Jamaludin, Siti Nur Sakinah and Kamaruzaman, F. F. (2018) Preparation and characterization of 6-layered functionally graded nickel-alumina (Ni-Al2O3) composites. In: IOP Conference Series: Materials Science and Engineering.

Abugabr Elhag, Husam Eldin Elhag and Naila, Aishath and Ajit, Azilah and Abdul Aziz, Badhrulhisham and Sulaiman, Ahmad Ziad (2018) Sequential extraction of saponins from Eurycoma longifolia roots by water extraction and ultrasound-assisted extraction. In: The 3rd International Conference on Green Chemical Engineering and Technology (3rd GCET): Materials Science, 07-08 November 2017.

Ayub Ahmed Janvekar and M. Z. Abdullah and Z. A. Ahmad and Aizat Abas and Musavir Bashir and Mazlan Mohamed (2018) Comparative study on porous media combustion characteristics using different discrete materials. In: MATEC Web of Conferences.

Badaruddin Muhammad and Dwi Pebrianti and Normaniha Abdul Ghani and Nor Hidayati Abdul Aziz and Nor Azlina Ab Aziz and Mohd Saberi Mohamad and Mohd Ibrahim Shapiai and Zuwairie Ibrahim (2018) An application of simulated Kalman filter optimization algorithm for parameter tuning in proportional-integral-derivative controllers for automatic voltage regulator system. In: 2018 SICE International Symposium on Control Systems (SICE ISCS), 9-11 March 2018, Tokyo, Japan.

Che Osmi, Siti Aisyah and Wan Ishak, Wan Faizal and Azman, Mohammad Adam and Ismail, Abdullah Siddiqi and Abu Samah, Nurlin (2018) Development of water quality modelling using InfoWork river simulation in Malacca river, Malaysia and contribution towards total maximum daily load approach. In: IOP Conference Series: Earth and Environmental Science.

Chung, Yiin Wong and Jun, Wei Lim and Yoshimitsu, Uemura and Fai, Kait Chong and Yin, Fong Yeong and Mohamad, Mardawani and Heri, Hermansyah (2018) Insect-based lipid for biodiesel production. In: AIP Conference Proceedings.

Janvekar, Ayub Ahmed and Abdullah, M. Z. and Ahmad, Z. A. and Abas, Aizat and Hussien, Ahmed A. and S.Kataraki, Pramod and Mazlan Mohamed, Mazlan and Husin, Azmi and Fadzli, Khairil (2018) Investigation of micro burner performance during porous media combustion for surface and submerged flames. In: International Conference on Aerospace and Mechanical Engineering (AeroMech17).

M. S. F., Nurshahida and M. A. N., Aini and Wan Ishak, Wan Mohd Faizal and I. A., Hamimi and Z., Nazikussabah (2018) Effect of drying methods on nutrient composition and physicochemical properties of Malaysian seaweeds. In: AIP Conference Proceedings.

Masri, Mohamad Najmi and Yusoff, Mahani and Nordin, N.N (2018) Effect of milling time on alumina-titania-carbon nanotube by powder metallurgy method. In: The International Fundamentum Sciences Symposium 2018.

Zahid, A R M and Masri, M N and Hussin, M H and Abu Bakar, M B (2018) The preliminary study on cassava (Manihot Esculenta) as gel polymer electrolyte for zinc-air battery. In: AIP Conference Proceedings.

UMK Etheses

Muhammad Qusyairie Saari (2018) The effect of ZnO-B₂Oз-SiO₂ (ZBS) glass additives to the microstructure and electrical properties of CaCuзTi4O1₂ (CCTO) electroceramic. Masters thesis, Universiti Malaysia Kelantan.

Undergraduate Final Project Report

Ab Ghani, Nur Atikah (2018) Methyl orange adsorption from aqueous solution by activated carbon: effect of Potassium Hydroxide (KOH) treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abd Azid, Siti Zawiyah (2018) Development of an eco-friendly Enzymatic Dehairing of skins and hides using Alkaline Protease and Keratinase. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abd Rahman, Abd Faiziladha Syahmi (2018) Partial purification of Amylase from isolate 1B using Ammonium Sulfate. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Rahman, Siti Norfadilah (2018) Study on the effect of plasticizer (Fructose) on the properties of Glutaraldehyde modified starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Samad, Nur Anati (2018) A study on sugarcane bagasse fibre reinforced unsaturated polyester resin biocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdullah, Atikah (2018) Mechanical and physical properties of coconut shell reinforced unsaturated polyester composites in the presence of Graphene as nano-reinforcing fillers. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdullah, Intan Harnila (2018) Characterization of Aluminium-Titania-Nickel Oxide hybrid nanocomposite prepared by powder metallurgy. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abibadrom, Muhammad Faiz (2018) Enhancement of mechanical properties of Singgora roof tiles by using flux. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ali, Nik Muhammad Muqit (2018) Bandgap tunability by synergistic mixture of plant-derived as photo-absorber candidates. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Amirul Fauzan Amerudin (2018) Rubberized Glutardialdehyde modified starch plasticized with Ethylene Glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anadin, Norzafirah (2018) Effect of zinc doping on electrical properties of CaCu3Ti4O12 produced using conventional and microwave techniques. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ang, Hui Yi (2018) Biogenic synthesis of Silver Nanoparticles and in vitro determination of antidiabetic activity of Cosmos caudatus (Ulam Raja) leaf extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ariffin, Siti Noraliza (2018) Effect of fibre loading and consolidation pressure on physical and mechanical properties of bamboo fibre reinforced unsaturated polyester composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Arumugam, Vinotheni (2018) Biosynthesis of Silver Nanoparticles of Swietenia macrophylla and evaluation of its antidiabetic and antioxidant activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Azhar, Anis Amalin (2018) Effect of strontium doped calcium copper titanate on the dielectric PROPERTIES. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aziz, Muhammad Afif (2018) Chemical modification of wood using Cetyltrimethylammonium Bromide (CTAB). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Azman, Aqilatul Afifah (2018) Parameters effect on chitosan beads via simultaneous crosslinking. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Azmi, Muhammad Asyraf (2018) Rubberized Glutardialdehyde modified starch plasticized with Fructose. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Basri, Siti Khairunnisa (2018) Utilisation of rice husk waste as catalyst precursor to convert polymer waste into 2-Chloroethyl Benzoate. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Beni, Nurul Amira (2018) Antimicrobial activity of different part of plant extracts of wild yam (Dioscorea hispida Dennst). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chai, Suet Yee (2018) Synthesis of RGO- Fe2O3/ TiO2 nanocomposite for photocatalytic activity of methylene blue. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Che Agoh @ Shukeri, Muhammad Afiq (2018) Chemical characterization Of Bamboo Leaves (G. Albociliata And D. Surculosa) by Sodium Hydroxide treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Che Ani, Muhamad Khairi (2018) Effect of silane and alkaline treatment on chemical structure of different sawdust. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Cheong, Yen Ling (2018) Production of bioethanol from groundnut shells (Arachis hypogaea) by using yeast (Saccharomyces cerevisiae) through Simultaneous Saccharification and Fermentation (SSF). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chew, Ying (2018) Removal of Congo Red from aqueous solution by adsorption on pandan leaves (Pandanus Amaryllifolius) Biochar using response surface methodology. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chin, Pui Yei (2018) The study of ploy(Methyl Methacrlate-Co-Methacrylic Acid) colloidosome prepared with various oil phase fraction via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Choo, Zhen Hou (2018) Synthesis of rGO-TiO2 nanocomposite for photocatalytic activity of methylene blue. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chua, Yong Kok (2018) Comparison between solid state reaction and co-precipitation methods for preparing yttrium barium copper oxide (YBa2Cu3O7) superconductor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Dolah, Nurnazhatul Azwina (2018) Characterization of Titanium supported Magnesium as solid base catalyst for biodiesel production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Doraraj, Kogila (2018) Study on characterization of discharge quality & pollution loads from Bangi in the Sg. Semenyih Basin and Mantin Wet Markets in the Sg. Beranang Basin. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Dzu, Khuzaimah (2018) Biodiesel production from extracted oil of Helianthus annus seed of pericarp by using strong alkaline catalyst of sodium methoxide and sodium hydroxide. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fatin Nursharidah Raniman (2018) Antibacterial Activity of Turmeric Essential Oil (Curcuma lnnga L.). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fisal, Mohamad Fikri Haziq (2018) Effect of calcination duration on Calcium Copper Titanium Oxide (CCTO) single phases formation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Goh, Kent Tiong (2018) Effect of beating on the strength of Pulp and Paper derived from Sesbania Grandiflora. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Gunasekar, Therhina (2018) Optimisation of parameters for removal of Methyl Red dye using sawdust as adsorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hadi, Nur Syahirah (2018) Analysis properties of Discorea hispida dennst flour (gadong flour) and its potential in bakery products. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hamzah, Hazwani (2018) Coconut frond biochar as adsorbent in removal of methylene blue dye in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hannanda Rao, Thevisri (2018) Biochar based on plantain peel as adsorbent for Rhodamine B Dye Removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hashim, Siti Hajar (2018) Extraction of natural blue dyes from clitoria ternatea. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hasnawi, Amira Mardia (2018) Effects of Nitrogen limitation media on the production of Algae Oil of Chlorella Pyrenoidosa sp. using the Soxhlet Extraction method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hassan, Noor Syamimi (2018) Cassava peel as adsorbent for removal of Malachite Green Dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hikamarhakimi, Nur Amila (2018) Study of Radon-222 emanations from fabricated composite brick based on treated kenaf fiber. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hong, Chow Chuen (2018) Biogenic synthesis and characterization of silver nanoparticles using strobilanthes crispus and in-vitro determination of antioxidant activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hui Qi Low (2018) Influence of the concentration and temperature of Hypochlorite on the properties of Pulp derived from Sesbania grandiflora. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Husain, Nur Faezatul Husna (2018) Study on the effect of Titanium Oxide (Ti02) additions on YBCO superconductor by solid state reaction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ibrahim, Noor Fathihah (2018) Effect of phosphorus concentration on culture medium of microalgae Chlorella vulgaris for algae oil extraction using soxhlet extractor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Idris, Nurul Arifah (2018) Utilisation of bamboo leaves as carbon/silica catalyst for conversion of polymer waste to chloroester. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ikhsan, Nurul Natasyha (2018) The potential of hybrid zinc chloride/ natural dyes extracts as photo-absorber in solar cell application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Imuda, Rahman (2018) Phytochemical analysis of 7 types of potatoes. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ismail, Adibah (2018) Comparative study of in vitro anti-inflammatory activity of sweet potato (Ipomeae Batatas). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ismail, Anis Nadhirah (2018) Adsorption of Methylene Blue Dye from Aqueous solution by Sugarcane Bagasse. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jamal Shah, Airin Izzurin (2018) Chemical composition of untreated and chemically treated rice husk. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jamaludin, Nur Amira (2018) Extraction of protease gene from recombinant host of Escherichia Colt BL21 (De3) Plyss. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jemmy, Nur Aqilah (2018) A study of anti caking agent and kinetic drying on production of iInstant powder lekor fritters. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jusoh, Mohamad Shafiq (2018) Optimisation of zinc ion removal from aqueous solution by rice husk biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kadri, Nur Aqilah (2018) A comparative study of nutritional values between chicken eggshells and cockle shells. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kamal, Muhammad Amal Yazmi (2018) Synthesis of reduced rGO-Fe203 Nanocomposite for Photocatalytic Activity of Methylene Blue Degradation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kamaruddin, Nadia (2018) The effect of physical factors on the production of α-Amylase from isolate 1B using response surface methodology. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kamisan, Batriya (2018) Generation of putative biosurfactant producing mutant by β-Lactam Mutagenesis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kantharao, Prema Lata (2018) Green synthesis of biogenic silver nanoparticles using Rhinacanthus nasutus plant and its antidiabetic and antioxidant properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kasi Raja, Kirija (2018) Biological synthesis Of Silver nanoparticles using Piper Betel leaf And stems and its antidiabetic activity in vitro. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kubendran, Kirrthana (2018) Petal (Parkia Speciosa) pod as adsorbent for removal of congo red dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Latiman, Nor Adlina (2018) Synthesis of Polysorbate 20 catalysed by Carbon/silica Precursor from rice husk for production of 2-Chloroethyl Benzoate. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lawrence, Denise Anne Sinnappan (2018) Petai (Parkia speciosa) pod as adsorbent for removal of malachite green dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lee, Yik Sin (2018) Bioethanol from pineapple peels using Saccharomyces cerevisiae through simultaneous saccharification and fermentation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Madina Mohamed, Anis Fathima (2018) Study of Rn-222 emanations from fabricated composite bricks based on banana stem fibre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mansor, Ahmad Mustaqim (2018) Photocatalytic properties of T102-Al203 based nanocomposite prepared by hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mansor, Nur Faizah Afiqah (2018) Optimisation of Adsorption Parameters Using Bamboo Biochar For The Removal Of Methylene Blue Dye by Response Surface Methodology. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mark Anthony, Ireene (2018) Biogenic synthesis of silver nanoparticles using different parts of Moringa oleifera and their in-vitro antidiabetic and antioxidant potential. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Md Rosli, Nurul Afikah (2018) Effect of Strontium doped with barium titanate on the dielectric constants. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mocktar, Nurfarah Aini (2018) Study of Rn-222 emanations from fabricated composite brick based on treated oil palm fibre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad, Norfarha Shahera (2018) Phytochemical analysis and anti-inflammatory activity of wild Yam Dioscorea Hispida Dennst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad, Sunaini (2018) Evaluating the growth and changes of Rhizophora species in five different islands, Delta Tumpat, Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Razapi, Nor Fatihah (2018) Study of Rn-222 emanation from fabricated composite brick based on treated sugar cane fibre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Taib, Atiqah (2018) Comparative in-vitro antioxidant potential of various sweet potato extracts (Stokes Purple and Johorean Blue). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Zahid, Abdul Rahman (2018) The study on cassava properties as gel polymer electrolyte in zinc-air battery. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamed Ali, Nik Mohamed Aisamuddin (2018) Chemical properties of Goniothalamus velutinus and potential prevention on wildlife. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad, Mushriha (2018) Characterization of In-Situ Copper alloy reinforced by Graphene via powder metallurgy technique. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Alwi, Nurnabihah (2018) Utilisation of bamboo leaves as carbon/silica precursor to convert polymer waste into 2-chloroethyl benzoate. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Amir, Noraidah (2018) Alumina-Titania-Reduced Graphene Oxide nanocomposite photocatalyst prepared by hydrothermal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Asri, Ahmad Syukri (2018) Effect of calcination time on calcium hydroxyphosphate (Hydroxyapatite) From tilapia fish bones and scales for protein enhancement in wheat flour. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Fauzi, Siti Aishah Hanani (2018) Investigation on optimum salt content for singgora roof fabrication. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Idris, Muhammad Hidir (2018) The study of physical properties and chemical composition of Dioscorea hispida dennst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nor, Nurul Hazwani (2018) A study on solidification kinetics of gelatin using avrami model. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Razi, Noor Azmeera (2018) Phytochemical screening and potential values of banana rowers (Musa Sp.). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Saad, Siti Noradilla (2018) Analysis of antioxidant activity in different part of wild yam (Dioscorea hispida dennst). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Sabri, Fatin Nur Amirah (2018) Parameter effect on Chitosan beads prepared via water-in-oil emulsion crosslinking methods. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Sadli, Wajihah (2018) Effect of foliar applied fertilizer on the growth of rubber tree (Hevea brasiliensis) budded seedlings. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Sallehin, Farah Ainaa (2018) Comparative study on physicochemical properties of Malaysia and Thailand fish sauce. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Yatim, Rozita (2018) Preparation of raw oyster shell for removal of crystal violet dye from aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Zin, Norfarayana Amira (2018) Effect of calcination temperature on synthesis of calcium hydroxyphosphate (Hydroxyapatite) from tilapia fish bones and scales for protein enhancement in wheat flour. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohmad Nasir, Izzati (2018) Study on the effect of Plasticizer (Propylene Glycol) on the properties of Glutaraldehyde Modified Starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mok, Chi Yan (2018) Study on solidification phenomenon of hot-extracted virgin Coconut Oil (HEVCO) and cold-extracted Coconut Oil (CEVCO) (Cocos nucifera L.) using the Avrami model. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Murugeson Pillai, Priyadharsheniy (2018) Cassava peel as adsorbent for Rhodamine B dye removal of Rhodamine B Dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Musril, Nuraini (2018) In vitro antimicrobial activity of stokes purple and johorean blue sweet potatoes (Ipamoea Batatas (L.)) extracts. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mustapha, Ahmad Shahreen Ezainy (2018) Effect of chemical treatment on mechanical and physical propertie so kenaf fiber mat reinforced unsaturated polyester composite with the presence of graphene as nano filler. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

N M Ramzi, Nik Amanina (2018) Anatomical structure and properties of Neolamarckia cadamba (Kelempayan). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nekmat, Ahmad Zaki (2018) Preliminary study on bio-film formation in various conditions. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ng, Lu Wei (2018) Application of response surface methodology for the optimization of copper (II) adsorption in aqueous solution using rambutan peel powder biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ng, Sieh Lee (2018) Isolation of Polyhydroxyalkanoates (PHAs) producing bacteria from hot spring. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Azmi, Nik Mohammad Ridhuan (2018) The use of chemically modified cellulose for copper ions adsorption. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Mohamad, Nik Nur Amirah Farhana (2018) Hydrothermal synthesis of reduced graphene oxide paper based nanocomposite for water treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nizamuddin Shah, Umi Nurulain (2018) Study on effect Of plasticizer (Urea) on the properties of Glutaraldehyde modified starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Noor Amri, Noor Fatin Azura (2018) Preliminary screening of Hibiscus cannabinus L. (Kenaf) leaves for development of functional food. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Ain Farhana Talib (2018) Radical Scavenging Activity of Crude Extract from Muntingia calabura. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Azimah Kamalrudin (2018) Study of The Effect of Plasticizer (Triethanolamine) on The Properties of Glutaraldehyde Modified Starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Liyana Hassan (2018) Development of Nanoemulsion Containing Extract of Sireh as Antibacterial Eco-Friendly. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Mastura binti Rahim (2018) Determination of Chemical Characterization in Rice Husk (Oryza saliva) treated with Sodium Hydroxide. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Norazli, Najieha (2018) Antimicrobial activities of Centella Asitica and Ocimum Basilicum against Escherichia coli and Staphylococcus sp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Norsamah Mohd Kassim (2018) Application of Remote Sensing in Detecting Changes of Land Use Impact of Flood in Delta Tumpat. Post-Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Alyaa Izzati Mohd Kila (2018) Study on physical and mechanical properties of Sungkai wood Peronema cenescens and Rubberwood Hevea brasiliensis after heat treatment. Final Year Project thesis, Faculty of Bioengineering and Technology. (Submitted)

Nur Husnina Mat Hussin (2018) Effect Of Grit Size On Contact Angle Surface Of Rubberwood (Hevea brasiliensis) And Sungkai (Peronema canescens). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Nadhirah Rosman (2018) Monitoring Mangrove Forests Changes Using Remote Sensing and Geographic Information System (GIS) in Delta Tumpat, Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Najihah Aina Saparudin (2018) Antioxidant Activity and Total Phenolic content of Chritia vespertilionis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Najwa Ibrahim (2018) Study on Anatomical Structure and Properties of Durian (Durio spp.) and Rambutan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syafinaz Zulkipli (2018) Development of Nanoemulsion containing Extracts of Ginger (Z. officinale) as Pesticide Eco-friendly. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syahirah Bitje Andrian Lucas @ Muhamad, . (2018) Study on Effect of Plasticizer (Ethylene Glycol) on the Properties of Glutaraldehyde Modified Starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurol Hadi, Fatin Athirah (2018) Application of steam distillation and soxhlet extraction method in Lansium Domesticum Corr. Essential oil recovery and determination of its antibacterial activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Najwa Jamal (2018) Antimicrobial Activity of Cinnamomum Zeylanicum and Piper Betle against E.Coli and Mouth Bacteria. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Omar, Syazrol (2018) The effect of garlic oil on the wood of Havea Brasiliensis as antifungal agent for White Rot Fungi. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ooi Saw, Choon shean (2018) Decolourisation of reactive orange 16 by locally isolated dye degrading microbe. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Othman, Nurfazira (2018) Functionalising of carbon/silica composite from bamboo leaves to convert polyethylene glycol monolaurate into 2-chloroethyl benzoate. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Pou, Jun Jat (2018) Characterisation of locally isolated dye degrading microbe. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rahman, Nor Hayati (2018) Preparation of raw Oyster Shell as adsorbent for removal of Congo Red in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Raja Mahmood, Raja Nora Ashikin (2018) Effect of fiber loading and chemical treatment on bamboo fiber reinforced polyester resin composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rama Rao, Sharmila Devi (2018) Biosynthesis of silver nanoparticles using Garcinia mangostana Linn (GML) leaves extract and their antidiabetic and antioxidant activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Razaini, Nurul Qurratul 'Ainne (2018) Biochar from bamboo (Schizostachyum brachycladum sp.) as adsorbent for removal of congo red dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Risyon, Nadia Shavika (2018) Carbon Sequestration of mangrove forest in Delta Tumpat, Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rodi, Ismah Hasanah (2018) Study of effect of Grit size on Contact Angle Surface of Kelempayan (Neolamarckiu cadamba) and Petai (Parkia speciosa) wood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rosdi, Rosaida (2018) Antimicrobial activities of hannah yams and jewel yams extracts. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roslan, Nurul Syazwani Nadhirah (2018) Characterization and analysis of sugar content at difference storage time of Dioscorea hispida dennst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rozman, Luqman Hakim (2018) Removal of copper ion (Cu) from aqueous solution by adsorption on pandan leaves Biochar using response surface methodology. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sahari, Nur Amalina (2018) Adsorption of copper (II) from aqueous solution by lime peels powder as biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Saharudin, Muhamad Shariman (2018) Physico-chemical properties of Sugarcane Bagasse (Saccharum officanarum). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Salleh, Hanis Suhaila (2018) Preparation of raw oyster shell biosorbent for removal of bromophenol blue dye in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sanun, Saliehan (2018) Production of biodiesel by Cucumis Melo Var. inodorus seed oil using alkaline catalyst of sodium hydroxide and sodium methoxide. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sapar, Muhammad Syafeez (2018) Removal of Copper ion from aqueous solution by tree bark as adsorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sazali, Mohd Firdaus (2018) Corrosion study of SN-BI lead-free solder in alkaline solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sha'ari, Mohamad Allif (2018) In vitro anti-inflammatory activity of different hannah Yam extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shaharlina Abd Rasid (2018) Detecting Vegetation Losses in Tumpat Shrimp Farming Area using Remote Sensing Technique. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shaharudin, Mohd Amir Muizz (2018) Rubberized Glutardialdehyde modified starch plasticized with Propylene Glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shahidan, Nurzarihah (2018) Physical and mechanical properties of coconut shell reinforced unsaturated polyester composites with the presence of Titanium Dioxide as additional filler. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shahrin, Nur Syuhahdah (2018) Mechanical and thermal properties of kenaf fiber mat reinforced unsaturated polyester composites with the presence of graphene as nano filler. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sheikh Kamal, Syarifah Haniera (2018) Aboveground biomass and carbon storage Of Rhizophora Spp. In delta Tumpat. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shioa Wei Tan (2018) Effects of sodium hydroxide concentration on properties of pulp and paper derived from Sesbania grandiflora. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shuaib, Nurul Ezzatie (2018) Effect of light intensity on cultivation of microalgae (Chiorella Vulgaris) for extraction of algae oil by using soxhlet extractor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sidi Ahmad, Muhammad Sobri (2018) Synthesis of Titanium Barium Copper Oxide (TIBCO) doped with magnesium prepared by solid state reaction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Simon, Sharon Lina (2018) The Allelophatic Effects of Acacia mangium leaves on the Seed Germination and Initial Growth of Maize (Zea mays L.) and Rice (Oryza saliva). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sook Chi Kuek (2018) Chemical composition analysis of Sesbania grandiflora for Pulp and Paper production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tan, Tse Erng (2018) Isolation of Polyethylene degrading bacteria isolated from soil. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ting Hon, Brenda (2018) Preparation of raw Oyster shell for removal of Coomassie Brilliant Blue R-250 Dye from aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tung, Lun Hao (2018) Effect of additions Titanium Oxide on mechanical and physical properties of YBCO superconductor by co-precipitation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Ahmad Wizan, Wan Amira Shaerah (2018) Study on physical and mechanical properties of Nephelium Lappaceum L. Wood after oven-dried and oil heat treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Hassan, Wan Nur Hidayah (2018) Characterization of Alumina supported Potassium compound as solid base catalyst for biodiesel production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

We Hoong Wong (2018) Developing seedling capsule using secondary fibre for angiosperm seedling propagation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wong, Chee Yang (2018) Characterization of Copper-Zinc composite reinforced by Graphene Nanoflakes synthesized by ball milling and powder metallurgy. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wong, Ee Ching (2018) A Study of Immobilised Dye Degrading Bacteria on Biochar for adsorption and degradation of Congo Red and Reactive Orange 16. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wong, Xian Huan (2018) Preparation of raw Oyster Shell for removal of Toluidine Blue Dye in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yaacob, Ismail (2018) Extraction and characterization of cellulose from Nicotiana Tabacum. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yaakub, Haslina (2018) Development of nanoemulsion containing Sirih (Piper betle) essential oil as pesticide formulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yang, Qiao Yi (2018) Optimization of Copper (II) removal from Aqueous Solution using Corn Husk as biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yeoh, Yee Kiat (2018) Biosorption of Malachite Green Dye by chicken eggshell and oyster shell Biochar: optimization and adsorption studies. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zailani, Nur Sahira Izzati (2018) Extraction of lignin from different sources of biomass using organosolv pretreatment and determination of its physical and chemical behaviour. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zainal, Nurul Shuhada (2018) A comparative study of physicochemical characterization of starches extracted from two type of Dioscorea Hispida Dennst cultivars grown in Malaysia. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zainal Abidin, Muhammad Amiruddin (2018) Rubberized Glutaraldehyde modified starch plasticized with Triethanolamine. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zainal Abidin, Nurul Zawani (2018) Release study of sodium alginate beads prepared via lonotropic gelation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zakaria, Zulaika (2018) Development of Nanoemulsion containing essential oil of garlic (Allium Sativum) As pesticide formulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkifle, Nur Shuhada Ezzati (2018) Effect of charcoal addition on mambong pottery properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkifli, Nur Afini (2018) Methyl orange adsorption from aqueous solution by activated carbon: effect of acidic solution treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkifli, Nur Syuhada (2018) Comparative in-vitro antioxidant potential of different sweet potatoes (Hannah Yam and Jewel Yam) extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkifli, Siti Shazlina (2018) Effect of different sand contents on mambong pottery. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkipli, Nur Athirah (2018) Effect of chemical treatment on Sugarcane Bagasse reinforced unsaturated polyester resin composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)