Items where Division is "Faculty of Bioengineering and Technology" and Year is 2019

A

Ab Razak, Siti Ilham Fatini (2019) Analysis of temperature and nitrate on fish ponds based on smart water monitoring system. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abd Salam, Salmah (2019) Effect of different extraction method of freshwater algae towards algae oil production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abd Wahab, Nur Ain Adila (2019) Study of cassava film properties influence by plasticizers in Zinc-Air fuel cell. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Aziz, Nabihah (2019) Effect of Plasticizer Glycerin on wood based technology. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Aziz, Nabihah (2019) Effect of Plasticizer Glycerin on wood based thermoplastic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Mutalib, Nurul Hidayah (2019) Analysis of phytochemical constituents of garlic (Allium sativum L.) against clinical pathogens. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdullah, Nurida Syahidah (2019) Thermal behaviour of Torrefied Biochar from oil palm empty fruit bunch (Opefb). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abu Samah, Aziyan Izzati (2019) Evaluation of the antibacterial activity of selected antibacterial soaps and raw plants on clinical isolates of Escherichia coli and Staphylococcus aureus. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad, Syahiran Mustaqim (2019) Life cycle assessment of wood plastic composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Rohaizad, Eizzaty Annur (2019) Study of phytochemical constituents on Swietenia macrophylla and Musa acuminata fruits. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Zaid Azri Ahmad Zakaria (2019) Xylan-based Nicotiana Tabaccum stalk derived active food packaging. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aidil Azwa binti Ab. Ghani (2019) Formulation of antifoaming agent from silicon based polymer for industrial surfactant. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aiman Vinesh, Syuhrah (2019) Cationic Starch as additives in paper making of Sesbania grandiflora Pulp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aneis Maasyirah Binti Hamzah (2019) Utilization of rice husk ash (RHA) into ceramic brick. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ang, Kar Moon (2019) Preparation of Hydrogel Films of Sodium Alginate and Gelatin with Aloe Vera via solvent casting and cross-linking method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anis Nadzirah Ayub (2019) Biochar from bamboo as adsorbent for removal of reactive orange 16. Final Year Project thesis, Universiti Malaysia Kelantan (UMK). (Submitted)

Arbia binti Bacho (2019) Water quality assessment of UMK lake and the effect of seaweed treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ashma Diyanti Binti Affandi (2019) Kappaphycus alvarezii, Sargassum polysystum sp. and Manihot esculenta sp. as PhotoSensitizers in Dye-Sensitized Solar cell. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

B

Badiuzaman, Fatin Athirah (2019) Preliminary characterization of Methanolic and Ethanolic extract of banana (Musa acuminata x balbisiana Calla cv. Awak) leaves. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Basry, Nur Adila Amira (2019) The effect of Copper Oxide added with Zinc Oxide nanostructure prepared by hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Beh, Pei Xin (2019) Finite element analysis of Graphite-Thermoplastic composite of bipolar plate in Proton Exchange Membrane Fuel Cell (PEMFC) using solidworks® software. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

D

Dzolkifle, Syazana (2019) Extracts compound of hybrid and native orchid as anti micobial. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Dzulkarnain, Siti Zaleha (2019) Bioethanol from valencia orange (Citrus sinensis) through fermentation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

F

Fairus Zehan binti Mohd Said (2019) Determination of heavy metals (Cd, Pb, Hg and Zn) in cosmetic products using Atomic Absorption Spectrometer (AAS). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Farah Amanina Mohd Zin (2019) Synergistic effect of graphene oxide silver nanocomposite and cellulose nanofibril aerogel for enhancement of antibacterial performances. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Fatin Nabilah Binti Ishak (2019) The optimization of various extraction method of dioscorine from dioscorea hispida dennst tuber. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fatin Nadzirah Abdul Aziz (2019) Optimization of heavy metal removal from leachate using maize leaves and papaya bark as biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fatinamierah Najiehah Azmi (2019) Decoloursation and degradation of reactive orange 16 (RO16) dye by co-immobilized dye degrading microbe and coconut fronds biochar. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fauzi, Nurul Fayyadhah Insyirah (2019) Effect of TAPzyme 50a formulation to remove blood, egg yolk and milk stains on crepe cloth. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

G

Guan, Choi Yee (2019) Extraction of cellulose fiber from banana pseudo-stem using chemical pretreatment and ultrasonic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

H

Halimah Khalid (2019) Development of an eco-friendly enzymatic dehairing of skins and hides using alkaline protease. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hamdan, Sharifah Farhana (2019) Microstructure and properties of Al203-TiO2 nanocomposite using high energy milling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hartati Katu Mahmud (2019) Study on different metal oxide with Hylocereus polyrhizus (dragon fruit) in dye-sensitized solar cells performance. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hashim, Danial Shamzari (2019) Utilization of wood saw dust as partial replacement of rail material in Porous Ceramic production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hassan, Nurul Aini (2019) Antibacterial activity of mixed Dukung Anak (Phyllanthus niruri) Oil and Kaffir Lime (Citrus hystrix) Oil against pathogenic bacteria. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hassan, Syaheera Putri (2019) Effect of beach sand addition on Singgora roof tile properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hidayani Jaafar (2019) Modified dye-sensitized solar cell (DSSC) for enhancement of photovoltaic properties. Doctoral thesis, Universiti Sains Malaysia.

I

Ibrahim, Nurfatihah (2019) Microwave synthesis of Silver-Graphene Oxide nanocomposite for determination Of mercury ion (Hg2+). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ibrahim, Siti Nurain (2019) Study of water quality from wastewater by using seaweed. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ismail, Farah Wahida (2019) Correlation of milling parameters on structural and microstructural characteristics of Alumina-Titania-Graphite nanocomposite produced by high energy planetary mill. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

J

Johar Azmi, Nur Afiqah Hamizah (2019) Effect of milling time and compaction pressure of Alumina – Titania composite prepared by powder metallurgy route. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Johari, Anis Syamimi (2019) Effect of Zinc Oxide (ZnO) to the growth of fungi on Singgora Roof tile. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Johari, Norma Ira (2019) Effect of Hevea brasiliensis Sawdust on the properties of thermoplastic starch plasticized by Ethylene Glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

K

Kamarudin, Farrah Izzatul Ain (2019) Preparation of Banana peel powder-silver nanoparticle for antibacterial activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kamrul Zaman, Siti Nurdiyana (2019) Effect of relative humidity on mechanical properties of paper produce from Sesbania grandiflora pulp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khaire, Nurul Izzati (2019) Preliminary characterization of Methanolic extraction crude from leaves of Kaempferia galangal and Curcuma longa. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

L

Lee, Chun Eng (2019) Optimisation of proteus mirabilis strain PI18 β-Glucan extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lee, Jia Mean (2019) Isolation of methylobacterium sp. (Pink Pigmented Facultative Methylotrophs) from paddy (Oryza sativa) and oil palm (Elaeis guineensis). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Liew, Jing Xian (2019) Determination of optimal duration for Hypochlorite Bleaching for Sesbania grandiflora pulp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim, Joe Chien (2019) The conductivity properties of Manihot esculenta (Cassava)-coated zinc for zinc-air fuel cell application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim, Zai Wen (2019) Effect of Aluminium Oxide addition on physical and mechanical properties of YBCO superconductor prepared by co-precipitation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Loh, Chek Swee (2019) Effect of bleaching duration of Hydrogen Peroxide on Sesbania grandiflora pulp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lokman, Nur Hanisah (2019) Mechanical and physical properties of non-woven Kenaf Fibre Mat reinforced polypropylene composites prepared by compression molding. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

M

Mahyun, Nur Zafirah (2019) Optimization study of heavy metal removal by activated carbon from oil palm trunk (E.Guineensis) using Response Surface Methodology (RSM). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Manassvinee Gunasegaran (2019) Removal of metanil yellow dye from aqueous solution using cassava peel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mat Hussin, Syaliatie (2019) Development of tea waste reinforced unsaturated polyester biocomposites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mat Jusoh, Fatin Fakhira (2019) Extraction and preparation of cellulose Nitrate from oil palm empty fruit bunch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Hanafiah, Nur Hasira (2019) Biocomposites based on Citric Acid modified starch as the binder filled Kenaf fiber. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Senusi, Nur Aiman (2019) Microwave synthesis of silver Graphene Oxide for enhanced antimicrobial performances. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Yazid, Aina Azureen (2019) Study on required ergonomics space-saving bookcase for kids in Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamed, Nor Shahira (2019) Hybridization of insect repellent using Pelargonium Graveolens (Rose Geranium) Oil and Citrus Hystrix (Kaffir Lime) Oil. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamed Nasir, Nur Aliaa (2019) Development of Nanoemulsion containing Piper betle Essential Oil as an effective natural insecticide. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Ajwadil Hadi Abdul Halim (2019) Antimicrobial activity of chromolaena odorata and screening bioactive compound for the development of new phytopharmaceutical. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd, Haziq Amri (2019) Mechanical and thermal properties of hybrid non-woven Kenaf Fibre Mat-Graphene Nanoplatelets Reinforced Polypropylene Composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd, Mohammad Khairul Farhan (2019) Development of hyper flexible table manufacturing design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Azmi, Nik Nur Alisa (2019) Optimization study on removal of Methylene Blue by using activated carbon from oil palm trunk. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Fazli, Nur Fathin (2019) Analysis of temperature and dissolved oxygen on fish pond based on smart water monitoring system. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Ghazali, Saidah Najihah (2019) Elemental and crystallinity determination of Torrefied oil palm empty fruit bunch biochar. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Hamezan, Intan Syafiqah (2019) Study on acceptance of urban garden in bamboo seating structure in Ipoh, Perak. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Idris, Nurul Intan Nadirah (2019) Removal of methyl orange by using activated carbon from oil Palm Trunk (OPT). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nor, Hazwani (2019) In-situ production of Alumina-Titania-Graphite composite by mechanical milling and sintering. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nor, Muhammad Nasirruddin (2019) Study of Nanoemulsion containing Lemongrass (Cymbopogon citratus) essential oil for treatment of Fungi related diseases in wood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Salahuddin, Nur Izzati (2019) Study on potential of multipurpose desk for small space hostel in Universiti Malaysia Kelantan (UMK). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Soteri, Nursalwa Fakhira (2019) Chemical characteristic of fibre between coconut husk (Cocos nucifera), rice husk (Oryza sativa) and commercial cotton. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Zuki, Rabiatul Adawiyah (2019) Preparation of cellulose nitrate from pineapple leaf. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Khairuddin, Noor Effa Zulyanie (2019) Isolation of Nanocellulose from two different part of Kenaf Fibre via Acid Hydrolysis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Sharifuddin, Syifa’ (2019) Effect of Calcium Copper Titanate (CaCu3Ti4O12) addition on the properties of epoxidised natural Rubber 25 (ENR-25) composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamed, Nor Shafiqah (2019) Finite element analysis of wind turbine blade using solidworks® simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Fahmi Aizat Elias (2019) The potential of mixed dyes of Morus nigra L. and Sargassum binderi as photo absorber layer in solar cell devices. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Najib Ikmal Mohd Sabri (2019) Effect of chemical treatment on mechanical and physical properties of non-woven kenaf fibre mat reinforced polypropylene composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Wardi, Muhammad Aliff (2019) A study on Chitosan formulation to prepare microsphere via ultrasonicator probe. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Zulkarnain Mustafa (2019) Characterization of non-structural carbohydrate of two cultivars of Dioscorea hispida Dennst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

N

Nazmi Mohammad (2019) Identification and characterization of biosurfactant producing bacteria from Sungai Dungun. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ng, Zhi Lei (2019) The effect of endogeneous soil humic acids on microbial Fe(III) reduction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Noor Hamzah, Nureen Azian (2019) Synthesis and characterization of undoped and Samarium Gadolinium doped Lead Zirconate Titanate piezoelectric via solid state reaction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Effi Afizal Norisman (2019) Modeling of bio-methanol production from chicken manure using aspen plus® simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Shaf Reena Lizawardi (2019) Effect of TAPzyme 50a formulation on different fabrics in detergent spray application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Norazlisham, Puteri Nur’ain (2019) Modeling of bio-methanol production from waste biomass using aspen plus® simulation via gasification process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Norshafiqah Binti Shahbudin (2019) Decolorisation and degradation of reactive black 5 (RB5) dye by coImmobilized dye degrading microbe with spent coffee ground biochar. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Amirah Adnan (2019) Synthesis of single cell protein from Lactobacillus sp. and saccharomyces cerevisiae using corn cob. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Anis Fakhirah Mohd Fuad (2019) Bamboo as adsorbent for removal of methyl orange dye in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Fatihah Mokhtar (2019) Modelling and simulation of pasteurized milk production using superPro designer. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Haliyana Abd Alim, Nur Haliyana (2019) Extraction of cellulose fiber from banana tree (stem and peduncle) using chemical method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Hanisah Masarudin (2019) The use of chemically modified cellulose for adsorption of copper ions. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Ir Imani Ishak (2019) Optimisation of process variables by response surface methodology (RSM) for malachite green dye removal using spent tea leaves biochar. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syahida Amira Rosmadi (2019) Potential of agricultural waste materials: (Ananas comosus) peels as biosorbent for heavy metals removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syazwani Abd Hamid (2019) Enzymatic retting of kenaf bast fiber: effect of enzyme combination, retting time and solid to water volume ratio. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

O

Omar Ali, Siti Nor Alya (2019) Utilization of treated coffee waste as adsorbent for heavy metal (Cadmium, Chromium and Lead) removal from synthetic water. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Othman, Nurul Syamimi (2019) Optimization of process parameters in bio-retting kenaf bast fiber. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Q

Quah, Soon Wei (2019) Co-sensitizer dyes from Eucheuma cottonii sp. and Hylocereus polyrhizus sp. by the hybrid approach as a photoactive layer in solar cell application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

R

Rajidin, Siti Farah Hanun (2019) Life cycle assessment (LCA) of plastic bag production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ramli, Nur Asma Faiza (2019) Investigation of waste Banana Pseudo Stem (Musaacuminata) as potential raw material for Bioethanol production by fermentation process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ramli, Nurul Hidayah (2019) The effect of synthesis condition on the growth of ZnO nanostructure via hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ravindra, Mohana (2019) Effect on mechanical and physical properties of paper by variating ratios of OCC Pulps and Virgin Sesbania grandiflora Pulps. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roslan, Nurul Nashuhah (2019) Bioaccumulation of heavy metals in marsh clams (Polymesoda Expansa) as bio indicator for pollution in Kelantan River, Malaysia. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roslan, Rose Alifah Ellyana (2019) Effect of coupling agent on mechanical and physical properties of non-woven Kenaf Fibre reinforced polypropylene composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rosli, Shahirah (2019) Effect of different solvent and ratio towards algae oil production using soxhlet extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roslie, Azzariani (2019) Antioxidant activities, morphological properties and physical properties of different species on Manihot Esculenta. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rozeman, Nurul Farisyah (2019) Study on comparison of the sweetness on Stevia rebaudiana with others sweeteners. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

S

Safiee, Surayah (2019) Development and characterization of Nanocream containing Dukung Anak (Phyllanthus niruri Linn.) Oil for antimicrobial activities. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Samsudin, Rabiatul Adawiyah (2019) Corrosion study of Stanum-Bismuth-Copper Lead-free solder in acidic solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shamsuddin, Nurul Atiqah (2019) The encapasulation of banana psedo-stem biochar by using Na- alginate in removing methylene blue dye. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sofiyah Mohd Razali (2019) Characterization and properties of unsaturated polyester-Donax grandis hypodermal fiber composite. Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Sukri, Suziey Syamimi (2019) Effect of ZnFe2O4 addition on the properties of epoxidised natural rubber (ENR-25) Composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

T

Tan, Hui Ying (2019) Generation of iron-reduction deficient mutants in Shewanella oneidensis MR-1. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tan, Shiueh Fong (2019) Ascorbic acid assisted synthesis Of rGO-CNF hydrogel for the removal of methylene blue via adsorption. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tang, Chia Ling (2019) Analysis of nitrate and dissolved oxygen on fish ponds based on smart water monitoring system. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Te, Zi Yang (2019) A study on Polycaprolactone coated with Chitosan Microspheres via rapid solvent evaporation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tee, Chee Yin (2019) Ascorbic acid assisted synthesis of rGO-TIO2 hydrogel nanocomposite for methylene blue degradation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Teng, Pei Pei (2019) Optimization of DNA extraction from feathers for PCR-based avian sexing test. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Teo, Chai Ting (2019) A Study on Alginate encapsulated biosorbent from Spent Coffee Ground (SCG) for wastewater treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Teo, Wei Na (2019) Effect of calcination time and temperature to the properties of CaCu3Ti4O12 using enhanced microwave processing. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

W

W. Kadir, Wan Hanisah (2019) Evaluation of starch content from Dioscorea hispida (Ubi Gadong) using different extraction methods. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Hasnidah Wan Osman (2019) Enzymatic and structural studies of glutathione S-transferases of white-rot fungus Ceriporiopsis subvermispora which is a selective degrader of lignin in woody biomass. Doctoral thesis, Kyoto University.

Wan Hilmi, Wan Amni Izzatie (2019) Production of Biodiesel from waste cooking oil and Black Liquor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Nadhari, Wan Noor Aidawati and Danish, Mohammed and Mohd Nasir, Muhammad Syafiq Ridhwan and Boon, Jia Geng (2019) Mechanical properties and dimensional stability of particleboard fabricated from steam pre-treated banana trunk waste particles. Journal of Building Engineering Volume 26, November 2019, 100848, 26. ISSN 2352-7102

Wan Nor Azli Jasmi, Wan Nor Dini (2019) Comparison between Samarium doped nickel oxide and Samarium added nickel oxide on dielectric properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wong, Wei Yee (2019) Effect of addition Zinc in Tin-Copper lead free solder on corrosion study in chloride solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Y

Yaacub, Mazatul Shafinaz (2019) Formulation and characterization of Citrus Hystrix Nanoemulgel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Z

Zailani, Nur Fadhlin Syakina (2019) Effect of natural weathering degradation on hybrid composite (Banana Peel, Titanium Dioxide, Unsaturated Polyester Resin). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zainol, Nur Fakhira (2019) Characterization of Silica derived from Bamboo leaves Ash (Gigantochloa albociliata). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zakaria, Siti Zuriah (2019) Purification of recombinant proteases from Escherichia coli BL21 (DE3) pLysS. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zulkefli, Siti Nor Zafirah (2019) Extraction and antibacterial activity of pectin from banana peels waste. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)