Items where Division is "Faculty of Bioengineering and Technology" and Year is 2020

Ab Hadi, Nur Adillah (2020) Investigation of mechanical and physical properties of bioplastic from Dioscorea hispida (Ubi Gadong) starch extracted by mechanical method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ab Jalal, Muhammad Amirul (2020) Determination of heavy metals in surface sediment from Pahang river. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abd Rahman, Nur Iman Najwa (2020) Preliminary assessment of utilizing Electric Arc Furnace (eaf) steel slag waste into geopolymer ceramic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Karim, Nahrusyifa’ (2020) A study of parameter effects on Polycaprolactone (pcl) microparticles prepared via solvent evaporation method-ultrasonicator probe assisted. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdul Rahman, Nurul Alia (2020) Chemical modification of lignocellulosic material for heavy metal removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdullah, Nuur Zahraa Najwa (2020) Study on the characterization of thin film based on urea modified starch plasticized with ethylene glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Abdullah Sidek, Yasmin Suraya (2020) Study of an eco-friendly enzymatic dehairing of skins and hides using alkaline protease. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Adnan, Syahida (2020) Modification of sawdust and extracted cellulose using Cethyltrimethylammonium Bromide (CTAB) for oil removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Afandi, Norhafifi Akira (2020) Synthesis and characterization of aluminium doped Zinc Oxide by hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Afiqah Awang Kechik @ Awang (2020) Finite element analysis of impact test for fiber metal laminate fuselage using Solidworks ® Simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad, Nur Ayuni (2020) PRODUCTION of cellulose bioplastics derived from bamboo (Bamb Usa Vulgaris). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Fauzan Wahab (2020) Producing organic fertilizer from restaurant food waste using composting method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aiman Syazwan Rosmin (2020) The Optimization Study of Polyether Ether Ketone (PEEK) by Finite Element Analysis of Car Wheels in Automotive Industry Using Solidworks® Simulation Software. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Alias, Nur Syarafana (2020) Preparation and characterization of Acacia Senegal hydrogel electrolyte in zinc-air battery. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Amat Rahim, Nor Fadiana (2020) Formulation and characterization of Piper belle nanoemulgel for anti-microbial activities. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anuar, Aina Zafirah (2020) Characterization of Palm Oil Mill Effluent (POME) and biogas produce through anaerobic digestion using mixed culture from POME batch treatment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anuar, Muhamad Afiq (2020) The Effect of Different Shielding Gas to Format of Porosity in Aluminium by using Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anuar, Muhammad Nazirul Asyraf (2020) Fabrication and characterization of mixed matrix pvc polymer inclusion membranes using different nanoparticles for dye extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Unpublished)

Anuar Sadad, Khairun Nisa (2020) The effects of drying temperatures on wood preservative treatment in Kelempayan (Neolamarckia cadamba) wood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Anuwar, Nur Aina Annisa (2020) Oil spill sorption between sugarcane bagasse (Saccharurn officinaruin) and Rubber wood (Hevea brasiliensis); raw and acetylated on Pantai Kuala Perlis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Arifin, Airel Jashimiey (2020) Finite Element Analysis of New Laminated Composite Shells for Motorcycle Helmet via Solidworks® Simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Awang Kechik, Afiqah (2020) Finite Element Analysis of Impact Test for Fiber Metal Laminate Fuselage Using SolidWorks ® Simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ayub, Nur Amimi Muliana (2020) Characterization of Pink-Pigmented Facultative Methylotrophs (Ppfm) isolated from paddy leaf (Oryza Sativa). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Azizan, Nur Shamilatul Akhma binti (2020) Characterization of Al-Cu-Graphite nanocomposite prepared by powder metallurgy and mechanical alloying. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Buniamin, Nur Aqilah (2020) Synthesis of Sodium Alginate graphene oxide-silver thin film for mercury detection. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chan, Hua Jia (2020) The influences on paper properties by adding Sesbania Grandiflora pulp in old newspaper recycled pulp. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Che Abdul Rahim, Nurul Azian (2020) The extraction of natural dye from black tea waste for cotton dyeing application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Che Hanis Ibrahim @ Omar (2020) The effects of alley cropping using Sesbania grandiflora on soil fertility and productivity of Hibiscus sabdariffa on BRIS soil in Kelantan. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Che Miur, Amalin Sofia (2020) Humic acid degradation by the ozonation process: parameters effect and kinetic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Cheong, Kah Mei (2020) Study on Potential of Dioscorine Content from Dioscorea hispida Tuber as a Natural Preservative on Rubber Wood Panel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chong, An Ting (2020) A study of active components in aloe vera barbadensis extract using soxhlet extraction method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Doraisamy, Thanmoli (2020) Methods in cellulose extraction from kenaf core fiber via ammonium persulfate mediated oxidation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fazilah, Nurul Najah (2020) Characterization of Pink Pigmented Facultative Methylotrophs (PPFMs) from Palm oil (Elaeis guineensis) Leaves. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Gunaseharan, Pravenah (2020) Removal of malachite green dye from aqueous solution using Kenaf core fiber as adsorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hamdan, Nor Raihazlin Amani (2020) Development and characterization of nanocream containing Sirih (Piper belle) oil for antimicrobial activities. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hamdin, Noraini (2020) Optimization of biohydrogen production by Escberichia Coli in dark fermentation using POME as substratre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hamzah, Nurul Zurairah (2020) Biodiesel production from polanga oil extracted using Soxhlet Extractor with different type of solvent and ratio of seed to solvent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hazmi, Siti Aisyah Athirah (2020) Effect of Glycerol and Gluteraldehyde towards performances of Nicotiana tabacum/ starch derived bioplastics. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hilmi, Nur Syahirah (2020) Bioaccumulation of heavy metals in fish muscle from selected area of Kelantan River. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hisham, Nur Hazryna (2020) Effect of microwave sintering time to the microstructure and phase properties of conventional heat treated CaCu3Ti4O12 after calcination. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ismail, Nurus Shafiqah (2020) Influences of annealing for silicate glass property. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jillin Soo, Ai Lam (2020) Characterisation and kinetic studies of Poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) polymer inclusion membrane for the Malachite Green (MG) extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Johari, Amni Shahira (2020) Synthesis and Characterization of Cu-rich CCTO Dielectric Electro-ceramic Materials. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khairi, Nurul Izzati (2020) Bioethanol production from mangosteen peel using Saccharomyces Cerevisae and Escherichia Coli through separate hydrolysis and fermentation (shf) technique. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khanan, Nur Izyan (2020) Effect of kaolin-alumina ratio on physical and structural properties of ceramic porcelain. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kuek, Sue Wei (2020) Investigation the properties of silicone based and oil palm based antifoam. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lee, Mei Yuan (2020) A Study on the chemical and physical properties of bioplastic from Dioscorea hispida (Ubi Gadong) starch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim, Cee Kee (2020) Improvement of mixed matrix ultrafiltration Polyethersulfone Membrane blended with functionalized Titanium Dioxide / Multi-Wall Carbon Nanotubes for humic acid removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Liow, Xiao Hui (2020) Isolation and characterization of Pectinolytic bacteria from kenaf retting effluent & Palm Oil Mill Effluent (POME) sediment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Liu, Dick Hong (2020) Characterization of respiratory capabilities of Shewanella Oneidensis MR-1 Fe (III) reduction deficient mutants. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Loo, Jazween (2020) Bleaching efficiency of low concentration hydrogen peroxide on Sesbania Grandiflora. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lorans, Prevena (2020) Removal of metanil yellow from aqueous solution using kenaf core fibre as biosorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lye, Swee Chin (2020) Efficiency of low concentration hypochlorite on characteristics of paper derived from Sesbania grandiflora. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mansor, Nur Fatin Amira (2020) Preparation, characterization and optimization of biochar from oil palm empty fruit bunch. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Marathandavar, Reeta Roopini (2020) Removal of congo red from aqueous solution using kenaf core fiber. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Md Ariff, Hazirah (2020) Determination of heavy metal (Cr, Cd, Pb and Ni) in instant noodles by using Atomic Absorption Spectroscopy (AAS). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Md Puzi, Norsyazleen Laily (2020) Synthesis of nickel doped Zinc Oxide via solid state reaction method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Md Zulkifli, Muhammad Luqman Hakim (2020) Preliminary Assessment of Utilizing Wood Sawdust as Pore Forming Agent in Porous Ceramic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad, Suhaimi (2020) Extraction of gallic acid from Chromolaena sp. using ultrasound-assisted extraction (UAE). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Ruddin, Noor Zulai’ha (2020) The influence of drying temperature on preservative penetration in Sentang wood (Azadirachta excelsa). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Zaidi, Nur Zulaikha (2020) Preparation and characterisation of bioplastic from oil palm trunk. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamed Yusoff, Nur Adila (2020) The physical and mechanical properties of particleboard manufactured from rubberwood bonded with phenol formaldehyde. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Asari, Siti Atikah (2020) Effect of milling parameters on brass- alumina nanocomposites prepared by high energy ball milling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Roslan, Aisyatul Madihah (2020) Production of organic fertilizer from wet market food waste by composting method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd, Siti Hajar (2020) Effects of styrene butadiene rubber on physical and mechanical properties of kenaf core fiber reinforced polypropylene composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Adenam, Norfatihah (2020) Biodegradable active packaging film with Cinnamomum Porrectum wood extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Afandi, Nur Aina Aqilah (2020) Effect of plasma flow in plasma metal inert gas welding process to microstructure formation at heat affected zone of as welded carbon steel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Annual, Nur Nadhirah (2020) Optimization of DNA extraction of enriched iron-reducing bacteria from tropical freshwater stream sediment for metagenomic analysis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Azman, Muhammad Aiman Hakim (2020) Life cycle assessment of particleboard. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Fazli, Aliff Akhmal (2020) Optimization Of Rice Husk Ash (Rha) As Partial Replacement Of Cementing Material In Concrete Using Statistical Experimental Design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Ladin, Luqman Haniff (2020) Effect of Welding Process to the Porosity Formation in as Welded Carbon Steel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nazri, Arina Nazihah (2020) Biochar and Graphene Oxide as electron mediator for reduction of Fe (III) using Shewanella oneidensis MR-I. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Rosdi, Nurul Ainnabilah (2020) Study on characterization of thin film based on Glutaraldehyde modified starch and propylene glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Salim, Nurul Najwa (2020) Influence of time on Zinc Oxide growth by hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Salim, Nurul Najwa (2020) Synthesis of sodium alginate graphene oxide-silver thin film for antibacterial activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Taib, Farah Ilyana (2020) Characterization of silica derived from Kelampayan (Neolamarckia cadamba) and rubber tree (Hevea brasiliensis). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Tarmizi, Fatin Sufina (2020) Preliminary Study on The Effect of Zn Additions on Sn-0.7Cu Lead-Free Solder. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Toha, Bella Halida Putri (2020) Microbial β-glucan exopolysaccharide production in media supplemented with coconut water as carbon source. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Zaki, Nurul Nabilah (2020) Improved bioplastic properties of modified cassava starch (Manihot Esculenta) with graphene oxide. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Zin, Mohamad Redzuan (2020) Fabrication and characterization of PVC/MWCNT Polymer Inclusion Membranes (PIMs) for malachite green removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Worksha, Muhamad Akashah (2020) Design of enzymatic retting system for kenaf bast fiber using SolidWorks and SuperPro Designer. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Omar, Muhammad Navin (2020) Biosorption of methylene blue from aqueous solution using kenaf derived biochar: batch and desorption studies. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muniyappan, Gayathry (2020) Phytochemical screening, antioxidant and cytotoxicity activity of Muntingia Calabura (ceri kampung) fruit. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mustaffa, Iffah Nazihah (2020) Potential of Cinnainonium iners (Medang Teja) wood on its chemical composition and biological activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mustapa, Farah Emira (2020) Study on characterization of thin film based on Glutaraldehyde modified starch with plasticizer (Ethylene Glycol). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muzaidi, Nur Alya Syamimie (2020) The preparation of Tri-Hybrid Nanofluids (CuO-SiO2-TiO2) in water-ethylene glycol mixture for solar thermal application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Azim, Nik Amalia (2020) The effect of Shewanella Oneidensis MR-1 on Microbial Influenced Corrosion (MIC). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Mohd Kamaruzaman, Nik Fatin Qharanie (2020) Analysis of antimicrobial activity of ampicillin combined with Geniotrigona thoracica honey using Kirby-Bauer method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Rosdi, Nik Aida Hamizah (2020) Effect of epoxidised natural rubber on physical and mechanical properties of kenaf core fibre reinforced polypropylene composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Roshdi, Nik Wardah Sofiah (2020) Expression of recombinant protease gene from Bacillus subtilis 50a in Escherichia coli BL21 (DE3) harbouring pGEX. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

NorHisam, Mubarak Ali (2020) Decolourisation of Reactive Orange 16 (RO16) dye by free and Immobilized Bacillus UMKDG-1 cells in batch culture. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Norazman, Nur Atikah Izzati (2020) Production of biogas from palm oil mill effluent in anaerobic condition using water displacement method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Osman, Nurul Amirah (2020) A Study on calcium Alginate Encapsulation of coconut frond biochar on methylene blue removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Othman, Abdullah (2020) Properties of 1-butyl-3-methylimidazolium chloride (BMIMCL) Treated Sawdust-Reinforced Polyethylene Composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Pirdaus, Nur Alfarina (2020) Study of Beta vulgaris (Beetroot) extraction in polar solvents for photoabsorber in dye-sensitized solar cells application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ramarao, Lavania (2020) Synthesis and characterization of bioplastic of Napier grass (Pennisetum purpurem) cellulose with different type of plasticizers. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ramli, Hasna Hanis (2020) Production of organic fertilizer from hostel food waste by composting method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ravi, Suganthi (2020) Fabrication and characterisation of Polyvinylidene Fluoride Co-Hexafluoropropylene (PVDF-Co-HFP) Polymer Inclusion Membranes (PIMs) for Reactive Orange 16 (RO16) dye removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roma, Diah Nazirah (2020) Potential of the biodegradability & the characteristics of bioplastic from microalgae residues. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rosmin, Aiman Syazwan (2020) The Optimization Study of Polyether Ether Ketone (PEEK) By Finite Element Analysis of Car Wheels in Automotive Industry Using Solidworks® Simulation Software. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sabaruddin, Shah Ikhwan (2020) Extraction of cellulose from oil palm trunk (opt) by water treated fibre process for bioplastic development. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Salleh, Azam Azfar (2020) Accumulation of heavy metals in surface sediments as indicator for pollution in Kelantan river. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sani, Nurul Asikin Amirah (2020) Finite element analysis of impact test on laminated carbon fibre composite with aluminium car door via solidworks® simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sau, Wan Ting (2020) A study on Mechanical Properties of Polylactic Acid (PLA) reinforced with kenaf fiber mat biocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shamsul Kamar, Siti Nurullah (2020) Effect of sintering time to the properties of CaCu3Ti4O12 using enhanced microwave processing. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shukri, Nur Adilah (2020) Investigation of light intensity, nutrient and carbon sources towards microalgae oil production via soxhlet extraction techniques. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shunmugam, Neetiaasree (2020) The effect of high dosage of starch in Sesbania grandiflora pulp in improving the paper properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sidek, Nur Azmina (2020) Effect of plasma current in Plasma-MIG welding process to microstructure formation at heat affected zone of as welded carbon steel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siew, Khai Siong (2020) Optimization of congo red dye removal from aqueous solution by encapsulated eggshell membrane using central composite design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Nur Athirah Muhammad Zamri (2020) Preparation and characterization of agar as a binder for the Porous zinc anode in a Zinc-air battery. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Tan, Kok Boon (2020) Study on the effect of different drying temperatures on preservative treatability of Acacia Mangium. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tay, Jin Wen (2020) Adsorption and desorption study of malachite green using coconut frond biochar in packed bed continuous system. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ulaganathan, Rathesh Kumaran (2020) Characterisation of silica-alumina ratio in ceramic porcelain materials. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Utheyakumaran, Thepadarsini (2020) Removal of Rhodamine B dye in aqueous solution using raw timber wood sawdust as adsorbent. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wahab, Ahmad Fauzan (2020) Producing organic fertilizer from restaurant food waste using composting method. Post-Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Abd Halim, Wan Nur Hannani (2020) An extraction of natural dye from roselle calyces (Hibiscus sabdariffa) apply on cotton fabric. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Mohd Nasri, Wan Nurshafeera (2020) Synthesis of odium alginate graphene-oxide silver composite thin film for photocatalytic activity of methylene blue. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yazid, Khadijah Sabirah (2020) The study of Okra, Abelmoschus esculentus and Chickpea, Cicer aritenunz as coagulant in removing turbidity of water. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ya’akob, Nur Hidayah (2020) Effect of alumina addition on physical and structural properties of ceramic porcelain. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yew, Xin Ying (2020) Extraction of quercetin from Chromolaena sp using ultrasonic-assisted enzymatic extraction (UAEE). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zahidan, Nur Salsabilla (2020) Synthesis of cellulose derived from bamboo (Bambusa Vulgaris) for 2-d application: biofoam. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zahrin, Nur Aina Riza (2020) The effects of drying temperatures on the preservative retention and penetration of rubberwood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zaid Amri, Siti Hajar (2020) A study on PMMA-co-MAA hollow colloidosomes prepared via pickering emulsion method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zainal Abidin, Siti Mariam (2020) The development of nanoinsecticide containing citrus hystrix (Kaffir Lime) essential oil and its effect on ants. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zakria, Puteri Aisya (2020) Study on characterization of thin film based on urea modified starch and propylene glycol. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zali, Nur Athirah (2020) Accumulation of heavy metals in sediment core from Kelantan river tributaries of Gua Musang, Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Zuraik, Muhammad Amirul (2020) Preliminary investigation of delamination factor in drilling of Wood Plastic Composites (WPC). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)