Browse by Programme

Undergraduate Final Project Report

Afifah Mohd Yassin (2024) A study of PMMA-CO-MAA preparation using ultrasinicator via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Syakir Ismail@Ramli (2017) Study of hollow colloidosomes using polyhydroxybutyrate (PHB) as polymer via two steps solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Tirmizi Bin Roslan (2024) Characterization of Cu-Doped TiO2 using solvothermal method photoanodes. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aidi Adam Mohd Raof (2024) Synthesis of barium titanate using microwave heating method at different heating time. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aimin Nurhakim Adnan (2024) Carbon black-ZnO composite prepared using solid state method as counter electrode. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Amanina Izzati Ahmad Termizi (2017) Fabrication of mambong pottery by using slip casting method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Amir Syaifuddin Juhari (2017) Effects of feldspar addition on phase formation of CaCu3Ti4O12. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Angelica Yeoh Chern Yie (2024) Effect of cellulose nanocrystals/E-polylysine hybrid filler on PVA/CNC/E-polylysine nanocomposite for potential fresh food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Asmat Zahariman (2017) Synergism of Rn-222 reduction emanation with different type of coatings from red bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Bibi Intishaar Abdul Hakim (2024) Effect of adding sugarcane bagasse ash and glass powder on the performance of refractory bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Brandon Lim Cheun Jie (2017) Influence of TiO2 on mechanical, microstructural, and electrical properties of TiO2/rubber composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chaw Eileen (2022) Preparation And Characterization Of Cellulose Nanocrystals Extracted From Oil Palm Trunk Using Deep Eutectic Solvents. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Che Amir Haikal Che Zaharudin (2017) Synergisms of RN-222 reduction emanations with different thickness plaster from interlocking block. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chee Sai Wai (2017) Effect of chemical treatment on mechanical and thermal properties of kenaf fiber mat reinforced unsaturated polyester biocomposites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chee Wing Tung (2017) Study of mechanical and water absorption properties of bio-composite thin film from waste banana peel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Choo Jia Xin (2024) Effect of groove shape to the mechanical properties in gas metal arc welding process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Dalila Alia Binti Mohd Ruslim (2022) Anti-Fungal Properties Of Iron Compound-Rich Electric Are Furnace (Eaf) Slag. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Danabalan Purusoithman (2024) Characterization of UPR-Steel slag composite: effects of steel slag content and particle size. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Daniel Hakimi Fauzai (2024) Effect of various epoxy on LED encapsulation process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ezzarudin Eezahan (2017) Study on properties of ybco superconductor with addition titanium oxideTiO2 by solid state reaction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Hairil Azwan Hosney (2017) Effect of nickel oxide addition on YBCO superconductor properties prepared by solid state reaction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ho Min Ling (2024) Kenaf fiber mat/polylactic acid biocomposites: effect of chemical treatment on mechanical and physical properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Izzaty Inu (2017) Study of Cocos Nucifera L. (coconut) shell activated carbon for the removal of methylene blue in aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Joan Jimmy (2024) XRD studies on reduced Graphene Oxide-Aurum Nanocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kausalyaa Nanthakumar (2024) Effect of type of starch on the starch aerogel incorporated with azadirachta indica. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Keshvini Narendran (2024) UV-VIS studies on reduced graphene oxide silver nanocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khairil Naim Sukarno (2024) Effect of heating temperature on preparation ZNO/cellulose composites using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khalidah Adilah Ibrahim (2024) Preparation and charaterization of PVA / cellulose nanocrystals / ZNO nanocomposite as potential for thin film in chili fresh fruit packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lam Jun Lok (2024) The study of dispenser on LED encapsulation using computational fluid dynamics (CFD). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim, Wan Sin (2017) Use of ionic liquid for improvement of glucose yield for ethanol production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim Ze Wen (2022) Influence Of Ph On Optical And Structural Properties Of Zinc Oxide Nanoparticels By Hydrothermal Method. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Madihah Binti Abdul Karim (2022) Optimization Of Sintered Glass Ceramics From A Waste Glass. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Matthew, Chai Xujie (2017) A study of hollow colloidosomes using poly(methyl methacrylate-co-methacrylic acid), PMMA-co-MAA via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad AmirulAmin Yusri (2024) Preliminary study of utilizing walnut shell waste for clay-based porous ceramic production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Iskandar Dzulkarnain Mohd Hatta (2017) Effect of zinc addition on the superconducting properties of YBa2Cu3O7 ceramic. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Faizal Abd Majid (2024) A study on calcium alginate encapsulation of kaolin on methylene blue removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Ibrohim Abdullah (2017) Synergisms of Rn-222 reduction emanations with different type of coating from interlocking brick. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nurezzat Nuriman Abd Rasad (2024) Design and analysis of thresher machine flywheel using solidworks simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Afif Zaafarani Muhamad Aidi (2024) Effect of calcium copper titanate (CaCu3Ti4O12)/ barium titanate (BaTiO3) composition in electrical and microstructural properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Afiq Rosli (2024) Mechanical and physical characterization of chemically treated corncob fiber reinforced polyester bio-composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Aiman Azim Abd Aziz (2024) Optimization of chicken eggshell as pore forming agent in porous ceramic using response surface methodology (RSM) statistical design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Alfarizi Syafrul (2024) Characterization of epoxy with modified waste bagasse sugarcane composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Amirudin Fauzi (2024) Comparison of adhesion properties aluminium, stainless steel and mild steel substrate coated with metallic cerium. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Arif Rusli (2024) Electrocoagulation treatment of synthetic wastewater containing methyl orange dye and rhodamine blue dye using aluminium electrode: a comparative study. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Azim Bin Muhammad Azri (2022) Physio-Thermal Analysis Of Active Film Prepared With Chitosan And Sacha Inchi Leave Extract. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Danial Azahar (2024) Properties of epoxy AI₂O₃-TiO₂ nanocomposite for welded steel corrosion resistance. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Faiz Ab Razak (2024) Study on potential of anthocyanin pigment as natural dye sensitizers using ethanol and deionized water for extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Fauzan Bin Mohd Nasir (2022) Clay-Based Porous Ceramic Made From Peanut Shell (Arachis Hypogea) Shell Waste. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Fauzan Bin Mohd Nasir (2022) Clay-Based Porous Ceramic Made From Peanut Shell (Arachis Hypogea) Shell Waste. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Firdaus Azmi (2024) Effect on different heating time of ZnO/GO composite in semiconductor materials using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Firdaus Rosli (2024) Effect of defect Singgora roof tiles when mixed with clay for recycling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Khairul Amirun Norhisham (2024) Effect of annealing temperatures on carbon-TiO₂ counter electrode. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Khairul Fitri Mohd Zuki (2024) Preparation of ZnO/GO composite using a hydrothermal method for semiconductor material. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Nabil Mihat (2017) Extraction and characterization of nanocellulose from (oil palm wood). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Nazran Adli Yahya (2024) A study of thermal performance on heat existing for bus duct passive cooling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Nurwafiy Bin Nordin (2022) Finite Element Analysis Of Various Type Of Drainage Cover On Different Materials Approach. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Shahideen Sakri (2024) Preparation and characterization of PVA /cellulose nanocrystals/ e-polylysine nanocomposite as potential food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Syazwan Zainol Abidin (2024) Effect of glass powder on the properties of clay mixture for porcelain stoneware tiles. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Munirah Mohamad Zain (2017) The effect of heating and cooling sintering rate on CaCu3Ti4O12 (CCTO) formation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

NORILYANA AZUAR BINTI ROSLEY (2022) Mechanical And Thermal Properties Of Graphene Nanopletelet /Kenaf Core Fibre Reinforced Unsaturated Polyester Resin Biocomposite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nabilah Hanim Adnan (2024) Utilization of waste glass and demolished brick as coarse aggregate for sustainable concrete production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nadia Fadhilah Aziz (2024) Preparation and characterization of starch aerogels loaded with senna alata (l.) roxb leaves extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nazira Binti Mohd Zahir (2022) Synthesis And Characterization Of Cuo Doped Zno Composite Photovoltaic Thin Film: Effect Of Cuo Content. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nik NorHidayah Nik Jid (2024) Preliminary study on different calcination temperature of TiO2-eggshell composite using sol-gel method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Nurasikin Binti Nik Hassan (2022) Synthesize Zinc Oxide Nanostructure By Hydrothermal For Antibacterial Activity. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Noor Sahirah Muhazeli (2017) Extraction and characterization of nanocellulose from mahang wood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Amiera Syahida Arsyad (2017) Effect of chemical treatment on production of activated carbon from Cocos Nucifera L. (coconut) shell using microwave irradiation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Athirah Mohd Alias (2024) Characterization of ZnO with different pH values incorporate with cellulose on physical and optical properties using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Fhatin Husna Shuhaimi (2017) The effect of ionic liquid pretreatment on sawdust. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Irsalina Mohamad Nazeru (2024) Preparation and characterization of ZnO at different amounts of cellulose composite using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Khairiyah Azra Kamiran (2017) Study on production of Cocos Nucifera L. (coconut) shell as a bio-briquette. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Rohiman Binti Abdullah (2022) Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nor Syahirah Samsuddin (2017) Microwave synthesis of silvergraphene oxide for determination of mercury ion (HG2+). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Wardah Mohamad Senusi (2017) Characteristics of torrefied empty fruit bunches using microwave heating. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Adeeba Zakiah Binti Che Yusoh Zaki (2022) Different Concentration Of Sulphuric Acid Affected Hydrogen Induced Cracking In A304 Pipeline Stainless Steel. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Adibah Mohd (2017) The development of hybrid binder using cassava starch-epoxy resin blends. UNSPECIFIED thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Afiqah Bakri (2017) Morphology and bonding analysis of torrefied material. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Alia Syakirah Azman (2024) Characterization of agar hydrogel electrolyte of zinc-air battery. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Alyaa Balqis Azmi (2017) Hydrothermal synthesis of TiO2-Al2O3-Carbon nanotube nanocomposite and its characterization. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Anis Nabila Mokhtar (2017) A study on two step preparation of PCL80 hollow colloidosomes at different oil to water phase ratio. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Atieefah Yaakub (2017) A study of PCL10 at different oil in water volume ratio using polyvinyl alcohol, sugar ester as surfactant. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Azera Md Salim (2017) Properties and thermal behavior of raw and torrefied empty fruit bunch (EFB). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Farihah Mohamad Isa (2017) Characterization of alumina- graphene nanocomposite produced by hydrothermal method for environmental application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Farra Alisya Ahmed Shamrizan (2024) Application waste banana peel with waste carton’s box improve by fish bone filler for paper product. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Fatin Zaimi (2024) Release study of methylene blue (as drug model) by alginate-gelatin blend macrospheres prepared via crosslinking method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Izzati Mohamad Shukri (2017) Study of the preparation and characterization of activated carbon from cocos nucifera l. (coconut) husks and musa paradisiaca (banana) peel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Izzati Othman (2017) Finite element analysis of lamination of carbon fibre with aluminium (CARAL) of bumper beam in automotive industry using solidworks® software. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Mazliana Binti Mazlan (2022) Analysis And Characterization Of Biochar From Different Bamboo Species Prepared Via Pyrolysis. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Mazliana Binti Mazlan (2022) Analysis And Characterization Of Biochar From Different Bamboo Species Prepared Via Pyrolysis. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Nazihah Nordin (2017) Characterization of alumina titania carbon nanotube composite prepared by powder metallurgy method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Raihan Binti Hamizun (2022) Synthesis And Characterization Of Cacu3ti40.2electro Ceramic With Cobalt Additives. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Saidatul Athirah Md Zaiyadi (2024) Fabrication and characterization of mixed matrix ultrafiltration membrane incorporated with alumina oxide nanoparticle for humic acidremoval. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Shahirah Binti Shahar (2022) Investigations Of Ti02-Cu20 Composite Treated With Different Sintering Temperature As Photoanode. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Syafiqah Ahmad Niza (2017) Finite element analysis of conventional car door model for impact test using solidworks ®. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syaliani Mohamed Rafflisman Zaidi (2017) Coconut coir as a reinforcement in polyester biocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syazwana Adzhar (2024) Optimization of coconut husk as pore forming agent in porous ceramic using response surface methodology (rsm) statistical design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Zulaika Mohd Jamani (2017) Finite element analysis of car hood model for impact test by using solidworks software in automotive application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurin Nazifa Abu Bakar (2024) Study on calcium alginate encapsulation of hibiscus cannabinus l. Biochar on methylene blue removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nursyahzelin Bt Nordin (2021) A Study Of Bioactive Compounds Of Hibiscussabdariffa L. Extract Using Soxhlet Extraction Method. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN.

Nurul Adillah Farhana Ab Malek (2017) Structural and microstructural properties of in-situ alumina-titania-graphite hybrid nanocomposite via low energy milling. Final Year Project thesis, Faculty of Earth Science. (Submitted)

Nurul Afiqah Mohd Mokhtar (2017) Hydrothermal synthesis of silver-reduced graphene oxide (Ag-rGO) for determination of mercury ion (Hg2+). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Ainon Bakar (2017) Synthesis and characteristic of titanium dioxide (TiO2) doped nickel oxide (NiO) dielectric materials. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Aisyah Arifin (2024) Corrosion performance of epoxy-Cu-Zn-AI2O3 nanocomposite as coating for welded steel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Amalin Binti Zul Khairi (2022) The Effectiveness Of Torrefied Coconut Husk Using Conventional Heating. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nurul Amira Mohd Hasmidi (2017) A study of sugarcane bagasses as reinforcement in unsaturated polyester resin biocomposites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Asyiqin Ahmad Hisham (2024) A study of polycaprolactone particles prepared using ultrasonicator via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Asyiqin Syazwina Md Rashid (2024) Preparation and characterization of PVA /cellulose nanocrystals/ ɛ-polylysine nanocomposite as potential food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Basyirah Aryani Abdul Rahman (2017) Study on potential mahang of local wood as a core in fiberglass reinforced polymer sandwich composite in naval structure. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Natasha Awaludin (2024) Preparation and characterization of pectin aerogels loaded with Senna alata (L.) Roxb. leaves extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Zaffiqa Zamzuri (2017) Enhanced microwave absorption on formulated SIC/Feldspar composite susceptor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ong Chun Hau (2024) Investigating on the effects of LED design on microvoids formation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Rabiatul Alisha Mohd Rezalman (2024) Weld defect detection using ultrasonic testing (UT) and phased array ultrasonic testing (PAUT). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roslies Yusdarlina Mohd Yusoff (2017) Chemical composition analysis of raw and torrefied empty fruit bunch (EFB). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Roziana Abd. Rahim (2017) Effect of chemical treatment on mechanical and water absorption properties of kenaf fibre mat reinforced unsaturated polyester composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sakthy Thevi Pakianatan (2024) Effect of adding sawdust on physical and mechanical properties in ceramic bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Seah Rey Kar (2022) Application Of Tig-Mig Hybrid For Wire Arc Additive Manufacturing (Waam). Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Shaarany Chelliah (2024) Dynamic finite element analysis of a robotic arm for electronic devices transportation: design and simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Noor Asma Mohamad Zani (2017) Effect of consolidation pressure on physical and mechanical properties of unsaturated polyester resin-coconut shell-titanium dioxide composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Nor Atikah Binti Husin (2022) Development Of Smart Bim For Separation Of Metal And Non Metal Maste Using Lot Technclogy. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (In Press)

Siti Nur Aliah Nazarrudin (2024) Mechanical and physical characterization of chemically treated pineapple leaf fibre/polyester biocomposites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Nurhuda Mohd Nor (2017) Absorption of methyl orange using titania-alumina-graphene nanocomposite by hydrothermal synthesis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Nursyuhada Yahaya (2017) Effect of compaction pressure on microstructure and densification of alumina-titania composite prepared by powder metallurgy route. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Zuraina Nawawi (2017) Investigate microwave absorption on formulated SiC/ Al2O3 composite porous susceptor. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sitti Nurliana Hassan (2024) Physical and mechanical properties of concrete reinforced with kenaf fibre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Soo, Choy Yoke (2017) Extraction and characterization of nanocellulose from rubber wood. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Suhaiza Abdullah (2017) Synthesis and preparation of activated carbon from Cocos Nucifera L. (coconut) shell and sugarcane bagasse. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Suliana Ab Razak (2017) Study of alumina graphite composite using powder metallurgy processing technique. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Susindran Manogaran (2024) Comparative analysis of soil characteristics and environmental monitoring using IoT. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Syarezul Marzuki (2024) Porosity reduction in aluminium welding using TIG-MIG hybrid welding. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tan Hee Hong (2024) Characterization of Al2O3-TiO2-eggshell nanocomposite prepared by high energy ball milling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tan Yong Jin (2024) The effect of using different firing temperatures of waste glass for the production of glass bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Umi Natrah Mohd Sukri (2024) Electrocoagulation treatment of synthetic wastewater containing methyl orange and rhodamine b dye using stainless steel electrode: a comparative study. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Umi Shuhaili Said (2024) Study the contact angle measurement and characterization of Sn-Cu lead-free solder on copper substrates. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Vaiishnahvi Rajendran (2024) Release study of methylene blue as model drug encapsulated by alginate-starch blend beads prepared via crosslinking method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Atikah Wan Abid (2017) Effect of chemical treatment on mechanical and water absorption properties of kenaf-glass fibre mat reinforced unsaturated polyester hybrid composites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Farahiyah Iffah Tun Sulong (2024) Evaluation of physicochemical and thermal properties of pectin and starch aerogels and their absorption capacity of methylene blue. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Marinah Izzati Wan Ismail (2017) Study of corrosion behaviour of zinc in potassium hydroxide electrolyte. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Nur Khairunnisa Wan Jusoh (2017) Pelletizing properties of raw and torrified Empty Fruit Bunches (EFB). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Yasmin Abdul Karim (2017) Synthesis and influence of Al2O3 nanoparticles addition on the structural and microstructure properties of YBa2Cu3O7 ceramic superconductors. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)