Items where Division is "Faculty of Bioengineering and Technology" and Year is 2023

A

Ahmad Faris Hazmi Bin Ahmed Hisyam (2023) Optimization of Peanut Shell Waste as Pore Forming Agent in Clay Based in Porous Ceramic Using General Full Factorial Design (GFFD) Statistical Approaches. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Ahmad Zul Izzi Fauzi (2023) Application of anaerobic digestion model no 1 in biohydrogen optimization using palm oil mill effluent: effect of pretreatment method. Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Azul Hilme Bin Haris (2023) Effect Of Cellulose Added With Zno Using Hydrothermal Method. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

C

Camilla Kong (2023) Microstructural Observation of Carbon Manganese Steel During Underwater welding. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

D

Danial Shamzari Hashim (2023) The effectiveness of bamboo activated carbon in wastewater treatment using control charts. Masters thesis, Universiti Malaysia Kelantan.

L

Lew See Ling (2023) Inite Element Analysis For Aluminium Alloy 6061-T4 And Ductile Iron. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

M

Mac Ateer Anak Grinson (2023) Performance Of Ferrous Solution Produced By Industrial Steel Slag For Treating Water From Sungai Chalil, Gua Musang Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Amir Husni Bin Ismail (2023) Characterization Of Polyester- Cu-Zm-Al203 Nanocomposite As Coating Layer For Steel Welding. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Mohd Amiruddin Fikri Yaakob (2023) Study of TiO2-SiO2 nanofluids for heat transfer enhancement in solar collector system. Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Yuzaini Azrai Mat Yunin (2023) Synthesis and characterization of two-dimensional (2D) Aminoethyl Methacrylate Perovskite with improved stability for Ammonia gas detection. Masters thesis, Universiti Malaysia Kelantan.

Muhammad Afiq Akmal (2023) Synthesis and characterization of Zinc Oxide added with Titanium Oxide Nanocomposite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

N

Nik Alnur Auli Nik Yusuf (2023) Bio-composite Consist of Waste Banana Peel, Egg Shell, Fish Bone, and Titanium Dioxide for Biodegradable Mulching Films. Doctoral thesis, Universiti Malaysia Kelantan. (Submitted)

Noor Hidayah Che Lah (2023) Study of cationic polymer P(DMA⁺-s-HEMA) prepared via ATRP method for protein immobilisation. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Aiman Mohamad Senusi (2023) Effect of cellulose nanocrystals and carbon nanotube as hybrid nanofillers on poly (vinyl alcohol)/cellulose nanocrystals/carbon nanotube nanocomposites. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Fifirianna Binti Slamat (2023) The Effect of TIG MIG Hybrid Welding on Porosity Observation in Aluminium 50883. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Izzati Mustapha (2023) Mechanical, thermal and physical properties of cellulose nanocrystal and graphene nanoplatelet as hybrid nanofillers for unsaturated polyester-kenaf core fiber bio-composites. Masters thesis, Universiti Malaysia Kelantan.

Nur Zahirah Begum Binti Lokuman (2023) Absorption Of Malachite Green Dye In Spent Cci Fee Ground And Spent Tea Ground. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nurul Fatini Binti Kamalrudin (2023) Development Of Smart Mambong's Flower Pot That Sensing Light Intensity & Soil Moisture Using Iot Technology. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN.

Nurul Qistina Ismail (2023) Characterization and effect of sodium dodecyl sulfate on polysulfone/polyethylene glycol membrane for Pb (II) ions removal. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

R

Rathesh Kumaran Ulaganathan (2023) Effect of cellulose nanocrystals (CNC) as reinforcement on polyvinyl alcohol/CNC nanocomposite. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

S

Saw Zi Wei (2023) Preliminary Study of Melastoma Malabathricum L. leaf Extract as Green Corrosion Inhibitor in the Car Radiator Coolant. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN.

Siti Madiha Husna Suhaimi (2023) Effect of graphene oxide addition on the characteristics and performance of polymer inclusion membrane for gold extraction. Masters thesis, Universiti Malaysia Kelantan.

Syahril bin Ahmad (2023) Effect of Hydrothermal and Sonication on Graphene Oxide Gold Nanocomposite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Syifa' Muhamad Sharifuddin (2023) Influence of calcium copper titanate filled rubber ceramic composite. Masters thesis, Universiti Malaysia Kelantan.

U

Umi Kalsum Binti Jamal Mohamed (2023) Kenaf core fibre/unsatured polyester resin biocomposites: Effect of fibre loading on mechanical and physical properties. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Universiti Malaysia Kelantan, Perpustakaan (2023) UMK@School Road2UMK - FBKT. [Video]

W

Wan Azhani Bt Wan Ismail (2023) Kenaf Core Fiber/Unsaturated Polyester Resin Biocomposites: Effect Of Chemical Treatment On Mechanical And Physical Properties. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Wan Norhayati Binti Wan Ramli (2023) Synthesis and Characterization of Graphene Oxide Embedded with Gold Nanoparticles. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)