Items where Division is "Faculty of Bioengineering and Technology" and Year is 2024

A

Afifah Mohd Yassin (2024) A study of PMMA-CO-MAA preparation using ultrasinicator via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ahmad Tirmizi Bin Roslan (2024) Characterization of Cu-Doped TiO2 using solvothermal method photoanodes. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aidi Adam Mohd Raof (2024) Synthesis of barium titanate using microwave heating method at different heating time. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aiman Hakimi Ashar (2024) Physico-mechanical properties of buluh madu (gigantochloa albociliata) particleboard bonded with different solid content and resin content of citric acid. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aimin Nurhakim Adnan (2024) Carbon black-ZnO composite prepared using solid state method as counter electrode. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Aina Nadirah Nordin (2024) Microwave-assisted extraction (MAE) of phenolic compounds from leaves senna alata (gelenggang). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Alphonsus Poli (2024) Extraction and characterization of konjac glucomannan from elephant foot yam (Amorphophallus Paeoniifolius). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Angelica Yeoh Chern Yie (2024) Effect of cellulose nanocrystals/E-polylysine hybrid filler on PVA/CNC/E-polylysine nanocomposite for potential fresh food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Annessa Nur Nabihah Amoni (2024) Enhancement of mixed matrix ultrafiltration polyethersulfone membrane incorporated with iron oxide nanoparticle for humic acid removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Azisyamimi Mohd (2024) XbeeSoap: Formulation of organic soap from stingless bee propolis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

B

Badrul Azim Mohd Ridhuan (2024) Microbial isolation and characterization of animal feed additives formulated using coconut water and rice water. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Bibi Intishaar Abdul Hakim (2024) Effect of adding sugarcane bagasse ash and glass powder on the performance of refractory bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

C

Chee Yu Cheng (2024) Isolation and characterization of electroactive bacteria for electricity generation in microbial fuel cell (MFC) supplemented with palm oil mill effluent (POME). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Chik Jia Ying (2024) Extraction of cellulose from rice husk, corn stem, corn tassel and oil palm empty fruit bunch using alkaline pretreatment and bleaching process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Choo Jia Xin (2024) Effect of groove shape to the mechanical properties in gas metal arc welding process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

D

Danabalan Purusoithman (2024) Characterization of UPR-Steel slag composite: effects of steel slag content and particle size. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Daniel Hakimi Fauzai (2024) Effect of various epoxy on LED encapsulation process. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

F

Flora Sunggau Janting (2024) Study on water quality in selected area from rivers in Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Fung Jing Jie (2024) Extraction of phenolic compounds from bamboo peels using Soxhlet extraction technique. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

G

Geetananthini Mahalingam (2024) Isolation and screening of pectinase producing bacteria. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

H

Ho Min Ling (2024) Kenaf fiber mat/polylactic acid biocomposites: effect of chemical treatment on mechanical and physical properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

I

Intan Liyana Abdul Rahman (2024) Biochar from pineapple peel as an adsorbent for removal of metanil yellow dye in an Aqueous solution. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

J

Jaya Sri Seegar (2024) Kinetic analysis of lactic acid production from different food waste sources using solid state fermentation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Joan Jimmy (2024) XRD studies on reduced Graphene Oxide-Aurum Nanocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Jolin Lau Hui Hsing (2024) Formulation and properties of antibacterial hydrogels using cellulose infused with silver ions. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

K

Kausalyaa Nanthakumar (2024) Effect of type of starch on the starch aerogel incorporated with azadirachta indica. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kee Shu Huey (2024) Comparative investigation on the optimization of hydrogel derived from cellulose of banana stem (musa x paradisiaca), cellulose and carboxymethylcellulose (CMC) crosslinked using citric acid. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Keshvini Narendran (2024) UV-VIS studies on reduced graphene oxide silver nanocomposite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khairil Naim Sukarno (2024) Effect of heating temperature on preparation ZNO/cellulose composites using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Khalidah Adilah Ibrahim (2024) Preparation and charaterization of PVA / cellulose nanocrystals / ZNO nanocomposite as potential for thin film in chili fresh fruit packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kirenthara Perumal (2024) Enzymatic-degumming process of kenaf bast fiber and its physical characterization. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Kuiek Siew Chin (2024) Formulation of biofertilizer using locally isolated Methylorubrum thiocyanatum UMK-PM2 and Methylorubrum salsuginis UMK-PM3 and their effect on the paddy growth. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

L

Lam Jun Lok (2024) The study of dispenser on LED encapsulation using computational fluid dynamics (CFD). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Latha S Davandran (2024) Determination of occurrence of escherichia coli ATCC 25922 antibiotic resistance mutants as a result of exposure to subinhibitory concentration of β-lactam antibiotic, ampicillin. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lau Chyun Wei (2024) Removal of iron impurities from refractory gold ore using Acidithiobacillus Ferrooxidans. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lim Wei Jie (2024) Thermogravimetric analysis of banana peels via pyrolysis. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Lishalan Periasamy (2024) Optimization of different builders in formulation of protease detergent using response surface methodology approach. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

M

Maisarah Zawawi (2024) Phytochemical screening and antioxidant activity of crude plant extracts from apium graveolens (celery) plant. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Maizatul Ashikin Mustapha (2024) Orange peel biochar as an adsorbent for removal of reactive orange 16 (RO16). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mishalini Viganeswaran (2024) Effect of different catalysts for biodiesel production via aspen plus® simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad AmirulAmin Yusri (2024) Preliminary study of utilizing walnut shell waste for clay-based porous ceramic production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamad Syahmi Mohamad Khairi (2024) Characterization of alumina supported chicken egg shells and potato peels for biodiesel catalyst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohamed Azlan Yusoof Abdul Haiyoo (2024) Distribution of heavy metals and REE in soil from Cameron Highland and Lojing. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Farid Haikal Zulkispeli (2024) Characterization of coconut shell - plantain peel as a dual potential biochar catalyst of biodiesel application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohammad Jamadil Farhan Fuad (2024) Distribution of rare earth elements (REEs) in soil from Gua Musang, Kelantan. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Faizal Abd Majid (2024) A study on calcium alginate encapsulation of kaolin on methylene blue removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nor Haiqal Norazman (2024) Investigation of indole-3-acetic acid production and bioremediation activity of Pseudarthrobacter sp UMK-PNF5. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Mohd Nurezzat Nuriman Abd Rasad (2024) Design and analysis of thresher machine flywheel using solidworks simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Afif Zaafarani Muhamad Aidi (2024) Effect of calcium copper titanate (CaCu3Ti4O12)/ barium titanate (BaTiO3) composition in electrical and microstructural properties. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhamad Afiq Rosli (2024) Mechanical and physical characterization of chemically treated corncob fiber reinforced polyester bio-composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Aiman Azim Abd Aziz (2024) Optimization of chicken eggshell as pore forming agent in porous ceramic using response surface methodology (RSM) statistical design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Alfarizi Syafrul (2024) Characterization of epoxy with modified waste bagasse sugarcane composite. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Amirudin Fauzi (2024) Comparison of adhesion properties aluminium, stainless steel and mild steel substrate coated with metallic cerium. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Arif Rusli (2024) Electrocoagulation treatment of synthetic wastewater containing methyl orange dye and rhodamine blue dye using aluminium electrode: a comparative study. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Danial Azahar (2024) Properties of epoxy AI₂O₃-TiO₂ nanocomposite for welded steel corrosion resistance. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Faiz Ab Razak (2024) Study on potential of anthocyanin pigment as natural dye sensitizers using ethanol and deionized water for extraction. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Faiz Zainuddin (2024) Characterization of alumina supported banana peel and chicken egg shell for biodiesel catalyst. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Firdaus Azmi (2024) Effect on different heating time of ZnO/GO composite in semiconductor materials using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Firdaus Rosli (2024) Effect of defect Singgora roof tiles when mixed with clay for recycling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Haziq Ilyas (2024) Exploring the viability of a compact anaerobic digestion solution for food waste transformation and biogas generation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Izzat Fitri Mohd Zaidi (2024) Performance of water media filter at main river, lake, and underground water for removing physical contamination by media combination. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Khairul Amirun Norhisham (2024) Effect of annealing temperatures on carbon-TiO₂ counter electrode. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Khairul Fitri Mohd Zuki (2024) Preparation of ZnO/GO composite using a hydrothermal method for semiconductor material. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Muhaimin Mohd Salji (2024) Determination of storage shelf – life for agarwood inducer inoculum Fusarium Solani USJPCC-600 and Aspergillus Niger. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Nazran Adli Yahya (2024) A study of thermal performance on heat existing for bus duct passive cooling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Shahideen Sakri (2024) Preparation and characterization of PVA /cellulose nanocrystals/ e-polylysine nanocomposite as potential food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Muhammad Syazwan Zainol Abidin (2024) Effect of glass powder on the properties of clay mixture for porcelain stoneware tiles. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

N

Nabilah Hanim Adnan (2024) Utilization of waste glass and demolished brick as coarse aggregate for sustainable concrete production. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nadia Fadhilah Aziz (2024) Preparation and characterization of starch aerogels loaded with senna alata (l.) roxb leaves extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Najil Ashaari (2024) Study on sediment quality using heavy metals from river sediment. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Ng Ton Chie (2024) Eco-friendly enzymatic dehairing of cowhide using thermostable alkaline protease 50a. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik Muhammad Husnul Firdaus Anuar (2024) Effect on the inoculation of Paraburkholderia kururiensis UMK PPS-6 towards plant’s and it antimicrobial activity. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nik NorHidayah Nik Jid (2024) Preliminary study on different calcination temperature of TiO2-eggshell composite using sol-gel method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nitthya Gunasekaran (2024) Amylase's impact on co-digestion for enhanced biogas production from diverse food waste and napier grass. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Noor Farihan Abd Wahab (2024) Extraction of quercetin from senna alata (l.) Leaves using ultrasonic-assisted extraction (UAE). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Aina Natasha Abu Bakar (2024) Effect of adsorbent dosage, initial concentration and contact time on methylene blue dye removal using bamboo-derived activated carbon. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Athirah Mohd Alias (2024) Characterization of ZnO with different pH values incorporate with cellulose on physical and optical properties using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Awanis Mohamad Ashary (2024) A cellulose-based hydrogel composite with antibacterial activities dressing on wound healing. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nor Irsalina Mohamad Nazeru (2024) Preparation and characterization of ZnO at different amounts of cellulose composite using hydrothermal method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Alia Syakirah Azman (2024) Characterization of agar hydrogel electrolyte of zinc-air battery. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Farra Alisya Ahmed Shamrizan (2024) Application waste banana peel with waste carton’s box improve by fish bone filler for paper product. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Fatin Zaimi (2024) Release study of methylene blue (as drug model) by alginate-gelatin blend macrospheres prepared via crosslinking method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Saidatul Athirah Md Zaiyadi (2024) Fabrication and characterization of mixed matrix ultrafiltration membrane incorporated with alumina oxide nanoparticle for humic acidremoval. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nur Syazwana Adzhar (2024) Optimization of coconut husk as pore forming agent in porous ceramic using response surface methodology (rsm) statistical design. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurin Nazifa Abu Bakar (2024) Study on calcium alginate encapsulation of hibiscus cannabinus l. Biochar on methylene blue removal. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Aisyah Arifin (2024) Corrosion performance of epoxy-Cu-Zn-AI2O3 nanocomposite as coating for welded steel. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Asyiqin Ahmad Hisham (2024) A study of polycaprolactone particles prepared using ultrasonicator via two step solvent evaporation method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Asyiqin Syazwina Md Rashid (2024) Preparation and characterization of PVA /cellulose nanocrystals/ ɛ-polylysine nanocomposite as potential food packaging application. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Natasha Awaludin (2024) Preparation and characterization of pectin aerogels loaded with Senna alata (L.) Roxb. leaves extract. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

O

Ong Chun Hau (2024) Investigating on the effects of LED design on microvoids formation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

R

Rabiatul Alisha Mohd Rezalman (2024) Weld defect detection using ultrasonic testing (UT) and phased array ultrasonic testing (PAUT). Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

S

Sakthy Thevi Pakianatan (2024) Effect of adding sawdust on physical and mechanical properties in ceramic bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Shaarany Chelliah (2024) Dynamic finite element analysis of a robotic arm for electronic devices transportation: design and simulation. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Siti Nur Aliah Nazarrudin (2024) Mechanical and physical characterization of chemically treated pineapple leaf fibre/polyester biocomposites. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Sitti Nurliana Hassan (2024) Physical and mechanical properties of concrete reinforced with kenaf fibre. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Susindran Manogaran (2024) Comparative analysis of soil characteristics and environmental monitoring using IoT. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Syarezul Marzuki (2024) Porosity reduction in aluminium welding using TIG-MIG hybrid welding. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

T

Tan Hee Hong (2024) Characterization of Al2O3-TiO2-eggshell nanocomposite prepared by high energy ball milling. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Tan Yong Jin (2024) The effect of using different firing temperatures of waste glass for the production of glass bricks. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

U

Umi Natrah Mohd Sukri (2024) Electrocoagulation treatment of synthetic wastewater containing methyl orange and rhodamine b dye using stainless steel electrode: a comparative study. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

Umi Shuhaili Said (2024) Study the contact angle measurement and characterization of Sn-Cu lead-free solder on copper substrates. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

V

Vaiishnahvi Rajendran (2024) Release study of methylene blue as model drug encapsulated by alginate-starch blend beads prepared via crosslinking method. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)

W

Wan Farahiyah Iffah Tun Sulong (2024) Evaluation of physicochemical and thermal properties of pectin and starch aerogels and their absorption capacity of methylene blue. Final Year Project thesis, Universiti Malaysia Kelantan. (Submitted)