Items where Division is "Faculty of Bioengineering and Technology" and Year is 2022

Amalin Sofia Che Miur (2022) Fabrication and characterization of Polyethersulfone/Aliquat 336/Graphene Oxide Ultrafiltration Membrane for Humic Acid Removal. Masters thesis, Universiti Malaysia Kelantan.

Chang, Shen Chang (2022) Rare earth element geochemistry of Kelantan and Pahang river fluvial sediments. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Chaw Eileen (2022) Preparation And Characterization Of Cellulose Nanocrystals Extracted From Oil Palm Trunk Using Deep Eutectic Solvents. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Dalila Alia Binti Mohd Ruslim (2022) Anti-Fungal Properties Of Iron Compound-Rich Electric Are Furnace (Eaf) Slag. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Fatin Akmmal Paizau (2022) Isolation and characterization of iron reducing bacteria from peninsular Malaysia East Coast marine environments. Masters thesis, Universiti Malaysia Kelantan.

Fatin Nur Alyaa Binti Mat Rifin (2022) Comparison Of Gold Recovery From High-Grade Ore Of Gua Musang, Kelantan Using Aqua Regia And Bioleaching Methods. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Ku Azmie Ku Husin (2022) A comparative and predictive analysis of solar power output from different tilt angles of Internet-Of-Thing (IoT) based solar panels for irrigation system. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Lee Kai Yang (2022) Microbiologically Induced Corrosion of MIG Welded SPCC Low Carbon Steel by Shewanella oneidensis MR-1 Under Different Growth Condition. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Lim Ze Wen (2022) Influence Of Ph On Optical And Structural Properties Of Zinc Oxide Nanoparticels By Hydrothermal Method. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Madihah Binti Abdul Karim (2022) Optimization Of Sintered Glass Ceramics From A Waste Glass. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Manassvinee Gunasegaran (2022) Effect of graphene oxide blended in poly (vinylidene fluoride-co-hexafluoropropene (PVDF-CO-HFP)) polymer inclusion membrane for silver ion removal. Masters thesis, Universiti Malaysia Kelantan.

Muhammad Azim Bin Muhammad Azri (2022) Physio-Thermal Analysis Of Active Film Prepared With Chitosan And Sacha Inchi Leave Extract. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Fauzan Bin Mohd Nasir (2022) Clay-Based Porous Ceramic Made From Peanut Shell (Arachis Hypogea) Shell Waste. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Fauzan Bin Mohd Nasir (2022) Clay-Based Porous Ceramic Made From Peanut Shell (Arachis Hypogea) Shell Waste. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Muhammad Nurwafiy Bin Nordin (2022) Finite Element Analysis Of Various Type Of Drainage Cover On Different Materials Approach. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Mustaqim Bin Sapian (2022) Analysis Of Commercial Compost And Compost Produced From Household Food Waste With Its Effects On Soil. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Mythili T Mohan (2022) Effect Of Graphene Oxide On The Properties Of Polymer Inclusion Membrane For Crystal Violet Extraction. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

NORILYANA AZUAR BINTI ROSLEY (2022) Mechanical And Thermal Properties Of Graphene Nanopletelet /Kenaf Core Fibre Reinforced Unsaturated Polyester Resin Biocomposite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nadia Aqilah Khalid (2022) Fabrication and characterization of Multi-Walled Carbon Nanotubes (MWCNT) / Polyvinyl Chloride (PVC) polymer inclusion membrane for Zinc (II) ions removal from aqueous solution. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Nafishah Binti Abd Rishah (2022) Effects of Titanium Dioxide (TiOz) on the Characteristics of Fabricated Polymer Inclusion Membrane for Removal of Reactive Orange (RO16) dye ABSTRACT. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nazira Binti Mohd Zahir (2022) Synthesis And Characterization Of Cuo Doped Zno Composite Photovoltaic Thin Film: Effect Of Cuo Content. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nik Nurasikin Binti Nik Hassan (2022) Synthesize Zinc Oxide Nanostructure By Hydrothermal For Antibacterial Activity. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nor Rohiman Binti Abdullah (2022) Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite Bamboo Biochar As Filler In Epoxy-Graphene Composite: Effect On Mechanical Properties Of The Composite. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Normazzaliana Ibrahim (2022) Molecular cloning and optimization of selected culture conditions for production of Thermostable Alkaline Protease 50a (TAP50a) in Escherichia coli BL21 (DE3) and TOP10. Masters thesis, Universiti Malaysia Kelantan.

Noruzaman Daud (2022) Characterization of nonstoichiometry CaCu3Ti4O12 precursors with different calcium and copper Molar Ratio via Modulated Thermogravimetry and Differential Scanning Calorimetry at 30-1000 °C. Doctoral thesis, Universiti Malaysia Kelantan.

Nur Adeeba Zakiah Binti Che Yusoh Zaki (2022) Different Concentration Of Sulphuric Acid Affected Hydrogen Induced Cracking In A304 Pipeline Stainless Steel. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Aliah Syahirah Binti Che Alwa (2022) The Study On Stability Of Thermostable Alkaline Protease 50a (Tap 50a) Through Computational Approach. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Amirah Binti Rahim (2022) Quality Analysis Of Biomass Empty Fruit Bunch (Feb) And Efb Briquetted Charcoal By Using Proximate Analysis And Energy Content Analysis. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Izzati Zakaria (2022) Preparation and characterisation of functionalised calcium carbonate nanoparticles from cockle shell for optical urea biosensor. Masters thesis, Universiti Malaysia Kelantan.

Nur Mazliana Binti Mazlan (2022) Analysis And Characterization Of Biochar From Different Bamboo Species Prepared Via Pyrolysis. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Mazliana Binti Mazlan (2022) Analysis And Characterization Of Biochar From Different Bamboo Species Prepared Via Pyrolysis. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Raihan Binti Hamizun (2022) Synthesis And Characterization Of Cacu3ti40.2electro Ceramic With Cobalt Additives. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Shahirah Binti Shahar (2022) Investigations Of Ti02-Cu20 Composite Treated With Different Sintering Temperature As Photoanode. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Syamimie Azlin Binti Suhaimi (2022) Investigation on Effectiveness of Spent Mushroom Substrate for Production of Bio Compost. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nur Zafirah Mahyun (2022) Aquaculture wastewater treatment by ozonation: Effect of process parameters and degradation kinetic studies. Masters thesis, Universiti Malaysia Kelantan.

Nurazeerah Khamis (2022) Isolation of biosurfactant producers and characterization of produced biosurfactants from Sungai Dungun Estuary, Terengganu. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Nurul Amalin Binti Zul Khairi (2022) The Effectiveness Of Torrefied Coconut Husk Using Conventional Heating. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Nurul Diyana Bt Abdullah Sham (2022) Recovery Of Gold From Low -Grade Ore Of Gua Musang, Kelantan Using Chenical And Biological Methods. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Rose Alifah Ellyana Roslan (2022) Study of arc behaviour during tungsten inert gas/metal inert gas hybrid welding of 5052A aluminium alloy. Masters thesis, Universiti Malaysia Kelantan.

Seah Rey Kar (2022) Application Of Tig-Mig Hybrid For Wire Arc Additive Manufacturing (Waam). Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Siti Koriah Zakaria (2022) Clay-based geopolymer ceramic incorporated with electric arc furnace (EAF) steel slag waste. Masters thesis, Universiti Malaysia Kelantan.

Siti Nor Atikah Binti Husin (2022) Development Of Smart Bim For Separation Of Metal And Non Metal Maste Using Lot Technclogy. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (In Press)

Siti Zulaikha Binti Mohd Radzuan (2022) Phytochemical Screening And Antioxidant Ivity Of Crude Plant Extracts From Kyllinga Brevifolia (Green Kyllinga) Plant. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Solehah Ahmad (2022) Study on the adsorption of different types of phenolic dyes using raw sugarcane bagasse as biosorbent. Masters thesis, Universiti Malaysia Kelantan. (Submitted)

Wan Hazwani Binti Wan Mohd Fakri (2022) Effect Of Magnesium Oxide (Mgo) As An Antifungal Agent On Singgora Roof Tile. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)

Wan Uswah Binti Abdullah (2022) Mechanical and Physical Properties of Hybrid Microcrystalline Cellulose/Kenaf Core Fibre reinforced Unsaturated Polyester Resin Biocomposites. Final Year Project thesis, UNIVERSITY MALAYSIA KELANTAN. (Submitted)